GB740 Info:
APPLICATIONS
- Aerospace Blind Rivets
- MS and 'A' Code thru 1/4"
- Installs long grip rivets in one pull
DOWNLOADS
The GB740 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets. It weighs 6.50 lbs. (2.95 kg) and can be operated in any position. It has a 1.330” (33.78 mm) fastener setting stroke and a rated pull load of 2,400 lbs. (10.7 kN) with 90 psi (6.2 bar) of air pressure at the air inlet.
The GB740 installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar), the GB740 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle). The air inlet is provided with 1/4 - 18 female pipe thread to accept the users air hose fitting.
Weight | 6.50 lbs. (2.95 kg) |
Rated Pull Load | 2,400 lbs. (10.7 kN) |
Stroke | 1.330” (33.78 mm) |
Width | 6.17 (156.7 mm) |
Noise Level | less than 81.5 dB(A) |
Warranty | 1 year |
Nose Assembly Selection Chart - GB740
Click Images For Enlarged View
MS20600 SERIES
MS/9SP/PT
NUT PLATE
BACR15CC/CF/DA/DR
DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
---|---|---|---|
1/8 | 4C-740B-52 | 4C-715A-54RA 1, 2 | 4C-715A-40OS 1 |
5/32 | 5C-740B-52 | 5C-715A-54RA 1, 2 | 5C-715-40OS 1 |
3/16 | 6C-740B-52 | 6C-715A-54RA 1, 2 | 6C-715-40OS 1 |
1/4 | 8C-740B-52 |
OLYMPIC LOK®
BULB LOK®
NAS1398A, NAS1399A
NAS1738A, NAS1739A
CHERRYLOCK® 'A'
DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
---|---|---|---|
1/8 | 4A-740B-52 | 4A-715A-54RA 1, 2 | 4A-715-40OS 1 |
5/32 | 5A-740B-52 | 5A-715A-54RA 1, 2 | 5A-715-40OS 1 |
3/16 | 6A-740B-52 | 6A-715A-54RA 1, 2 | 6A-715-40OS 1 |
1/4 | 8A-740B-52 |
CHERRYLOCK®
NAS1398, NAS 1399 3
NAS1738, NAS 1739 4
DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
---|---|---|---|
1/8 | 4C-640-64 | 4C-640A-50 | |
5/32 | 5C-640-64 | 5C-640A-50 | |
3/16 | 6C-640-64 | 6C-640A-50 | |
1/4 | 8C-640-64 | 8C-640A-50 |
GROUND STUD
M83454
BACS53B1EA1/2
DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
---|---|---|---|
8/32 | GS8-715B-43 1 | GS8-715A-54RA 1, 2 | GS8-715A-40OS 1 |
FOOTNOTES
GAGE BILT CERTIFIES THE GB740 WILL INSTALL THE ABOVE FASTENERS | |
1) REQUIRES 740715 ADAPTER. | |
2) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN 1 PULL. | |
3) 1/4 DIAMETER ALUMINUM & MONEL® ONLY. | |
4) THRU 3/16 DIAMETER ONLY. | |
*ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL AND COUNTERSUNK HEAD RIVETS. | |
NOTE: NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -52 = 5.2 INCHES |
CREDITS
CHERRYLOCK® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE. OLYMPIC LOK & BULB LOK® ARE REGISTERED TRADEMARKS OF ALLFAST FASTENING SYSTEMS INC. |