The GB50 pneumatic riveter is designed specifically for the most efficient installation of blind rivets. It will in-stall aluminum rivets through 5/32" diameter, and through 1/8" diameter rivets in any material. It weighs only 1.8 lbs. (0.82 kg) and can be operated in any position.

The GB50 Riveter is 8.36" high, has a .740 (18.8 mm) stroke and generates a minimum of 700 lbs. (3.11 kN) pull load at 90 psi (6.2 bar). It operates on 90 to 100 psi (6.2-6.9 bar) of air pressure at the tool.

The GB51 pneumatic riveter is designed specifically for the most efficient installation of blind rivets. It will install aluminum rivets through 3/16" diameter, and through 1/8" diameterrivets in any material. It weighs only 2 1/2 lbs. (1.13 kg) and can be operated in any position.

The GB51 Riveter is 8.36" high, has a .740 (18.8 mm) stroke and generates a minimum of 1000 lbs. (4.45 kN) of pull at 90 psi. (6.2 bar). It operates on 90 to 100 psi (6.2-6.9 bar) of air pressure at the tool.

The GB54B pneumatic installation tool is designed specifically for the most efficient installation of blind rivets. GB54B incorporates a collection bottle system to collect spent pintails into a bottle eliminating FOD. It will install aluminum rivets through 5/32" diameter, and through 1/8" diameter rivets in any material. It weighs only 1.8 lbs. (0.82 kg) and can oper-ate in any position.

The GB54B pneumatic installation tool is 8.36" (212.3 mm) high, has a .740” (18.8mm) stroke and generates a minimum of 700 lbs. (3.11 kN) pull load at 90 psi (6.2 bar). It operates on 90-100 psi (6.2-6.9 bar) of air pressure at the tool.

The GB55B pneumatic installation tool is designed specifically for the most efficient installation of blind rivets. GB55B incorporates a collection bottle system to collect spent pintails into a bottle eliminating FOD. It will install aluminum rivets through 3/16" diameter, and through 1/8" diameter rivets in any material. It weighs only 2 1/2 lbs. (1.13 kg) and can be operated in any position.

The GB55B pneumatic installation tool is 8.36" (212.4 mm) high, has a .740 (18.8 mm) stroke and generates a minimum of 1000 lbs. (4.45 kN) of pull at 90 psi. (6.2 bar). It operates on 90 to 100 psi (6.2-6.9 bar) of air pressureat the tool.