SPLIT SYSTEMS

The GB703SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tools unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 4.5 lbs. (2.0 kg). The entire split handle installation tool weighs 10 lbs. (4.5 kg). It has a .780” (19.8 mm) fastener setting stroke.

The GB703SHV is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.5 lbs. (1.1 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29 kg). It has a .780” (19.8 mm) fastener setting stroke.

The GB703SHVTPTS is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.5 lbs. (1.1 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29 kg). It has a .780” (19.8 mm) fastener setting stroke.

The GB703SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs just 1.5 lbs. (.68kg). The entire split handle installation tool weighs 4.5 lbs. (2.04 kg). It has a .780” (19.81mm) fastener setting stroke.

The GB703SRV is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 1.5 lbs. (.68 kg). The entire split handle installation tool weighs 11 lbs. (5 kg). It has a .780” (19.81 mm) fastener setting stroke.

The GB704SH series are pneumatic-hydraulic installation tools designed specifically for the efficient installation of blind fasteners. They can be operated in any position. They have a rated pull load of 3,300 lbs. (14.68 kN) with 90 psi (6.2 bar) air pressure at the air inlet.

The GB704SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 1.5 lbs. (.68 kg). The entire split handle installation tool weighs 6.5 lbs. (2.95 kg). It has a .540” (13.72 mm) fastener setting stroke.

The GB713SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.50 lbs. (1.1 kg). The entire split handle installation tool weighs 7.50 lbs. (3.4 kg). It has a .760” (19.3 mm) fastener setting stroke.

The GB713SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a .760" (19.30 mm) fastener setting stroke.

The GB714SH is a pneumatic-hydraulic split handle riveter designed specifically for the efficient installation of a wide range of blind rivets and lockbolt fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.50 lbs. (1.1 kg). The entire split handle riveter weighs 7.50 lbs. (3.4 kg). It has a .590” (15 mm) fastener setting stroke.

The GB722/568 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of 5/32” & 3/16” only HUCKRIMP® (krimpnuts) with a crimping action that deforms the nut to provide accurate installation loads. It (7.6 mm) fastener setting stroke and a rated pull load of 4,770 lbs. (21.22 kN) with 90 psi (6.2 bar) air pressure at the air inlet.

The GB731OSSH is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets and lockbolts. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 2 1/4 lbs. (1.02 kg). The entire installation tool weighs 10 1/2 lbs. (4.76 kg). It has a .600” (15.24 mm) fastener setting stroke.

The GB731SH is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of lockbolts and blind fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 2 1/4 lbs. (1.02 kg). The entire installation tool weighs 10 1/2 lbs. (4.76 kg). It has a .600” (15.24 mm) fastener setting stroke.

The GB731SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of lockbolts and blind fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2 lbs. (.91 kg). The entire split handle installation tool weighs 7 lbs. (3.2 kg) It has a .600” (15.24mm) fastener setting stroke.

The GB734SHV is a pneumatic-hydraulic split handle installation tool with vacuum designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29 kg). It has a 1.060” (26.92 mm) fastener setting stroke.

The GB743SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29kg). It has a .900” (22.86 mm) fastener setting stroke.

The GB743SHV is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29kg). It has a .900” (22.86 mm) fastener setting stroke.

The GB743SHVT is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 1.75 lbs. (.80 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29kg). It has a .900” (22.86 mm) fastener setting stroke.

The GB743SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder assembly when held in hand weighs 1.75 lbs. (.79kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29kg) It has a .900” (22.86mm) fastener setting stroke.

The GB743SRV is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.25 lbs. (.80 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29 kg). It has a .900” (22.86 mm) fastener setting stroke.

The GB743SRVT is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.75 lbs. (1.25 kg). The entire split handle installation tool weighs 7 1/4 lbs. (3.29kg). It has a .900” (22.86mm) fastener setting stroke.

The GB745/206-500 Split Handle Pneumatic-Hydraulic Installation Tool is designed specifically for the efficient installation of blind rivets and lockbolt fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool for a fraction of the cost of other cumbersome power rigs. It has a .500" (12.7mm) fastener setting stroke with a rated pull load of 5,600 lbs. (24.9 kN) at 90 psi. (6.2 bar) air pressure at the air inlet.

The GB745SH is a pneumatic-hydraulic split handled installation tool designed specifically for the efficient installation of blind fasteners, lockbolts and MAGNA-GRIP® fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 2 1/4 lbs. (1.02 kg). The entire split handle installation tool weighs 10 1/2 lbs. (4.76 kg). It has a .620” (15.75 mm) fastener setting stroke.

The GB745SR is a pneumatic-hydraulic split installation tool designed specifically for the efficient installation of blind rivets, lockbolts and MAGNA-GRIP® fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs just 3 lbs. (1.36 kg). The entire split handle installation tool weighs 10.2 lbs. (4.63 kg). It has a .620” (15.75 mm) fastener setting stroke.

The GB751SH is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique “split” system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.50 lbs. (1.13kg). The entire split handle installation tool weighs 7.50 lbs. (3.40kg). It has a .780” (19.8 mm) fastener setting stroke.

The GB751SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 1.75 lbs. (.79 kg). The entire split handle installation tool weighs 6.75 lbs. (3.06 kg). It has a .780” (19.81 mm) fastener setting stroke.

The GB751SRVT is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 1.75 lbs. (.79 kg). The entire split handle installation tool weighs 6.75 lbs. (3.06 kg). It has a .780” (19.81 mm) fastener setting stroke.

The GB752SH is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets and lockbolts. This tool’s unique “split” system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder assembly when held in hand weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.50 lbs. (3.40 kg). It has a .500” (12.7 mm) fastener setting stroke.

The GB752SHVT is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets and lockbolts. This tool’s unique “split” system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder assembly when held in hand weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.50 lbs. (3.40 kg). It has a .500” (12.7 mm) fastener setting stroke.

The GB752SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.00 lbs. (.91kg). The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a .500 (12.7 mm) fastener setting stroke.

The GB756SH is for installing up to 3/8” lockbolt fasteners. It offers a unique “split” system providing the operator with an ergonomic tool with a reduced hand held weight of only 4.3 lbs. (1.95 kg) and can be operated in any position.

The GB756SH has a .960 (24.38 mm) setting stroke, a rated pull load of 10,000 lbs. (44.48 kN) with 90 psi. (6.2 bar) air pressure at the air inlet and comes with 8ft (2.4 m) of hydraulic hose. Use with our Split-System Backpacks to increase user mobility, ergonomics and productivity.

The GB784SH is a pneumatic-hydraulic hydro-shift installation tool designed specifically for the efficient installation of the 2000 series CHERRYLOCK®, NAS1398, NAS1399, NAS1738 and NAS1739 double action blind rivets. The handle and head assembly when held in hand weighs 5 lbs. (2.27 kg). The GB784SH has a .875" (22.2 mm) fastener setting stroke and a rated pull load of 2,650 lbs. (11.79 kN) with 90 psi (6.2 bar) of air pressure at the air inlet.

The GB784SR is a pneumatic-hydraulic hydro-shift installation tool designed specifically for the efficient installation of the 2000 series CHERRYLOCK®, NAS1398, NAS1399, NAS1738 and NAS1739 double action blind rivets. The handle and head assembly when held in hand weighs 3.5 lbs. (1.59 kg). The GB784SR has a .875" (22.2 mm) fastener setting stroke and a rated pull load of 2,650 lbs. (11.79 kN) with 90 psi (6.2 bar) of air pressure at the air inlet.