POWER UNITS

Hydraulic power units for industrial, mobile and aerospace applications
GB808 Hydraulic Power Unit

GB808

4,000
90
40
Rated Pull Load
PSI
Lbs.

The GB808 SERIES High Production Power Unit is a portable power source designed to power a wide range of pneudraulic installation tools for millions of cycles.

The unit is air powered and air actuated. The actuator on the installation tool remotely controls the hydraulic fluids directional flow.

GB902 Hydraulic Power Unit

GB902

The GB902 Hydraulic Powerunit is a portable power source designed to operate a wide range of hydraulic installation tools with. It delivers up to 10,000 psi working pressure. It is fired manually by the operator and will accept any GAGE BILT or HUCK® hydraulic tool regardless of trigger style. The unit is activated via a control valve knob and foot pedal. The GB902 consists of a two position air hydraulic pump, four way control valve and relief valve mounted on the reservoir.
GB910 Hydraulic Power Unit

GB910

The GB910 Powerunit is a portable, air operated hydraulic power source designed to operate Gage Bilt hydraulic installation equipment. It is also compatible with HUCK® hydraulic installation equipment. The GB910 Powerunit operates on 90 - 100 psi. (6.2-6.9 bar), using 62 cfm @ 100 psi. (6.9 bar). The minimum hose recommended is ½" ID.
GB912 Hydraulic Power Unit

GB912

The GB912 Powerunit is a portable, air operated hydraulic power source designed to operate Gage Bilt hydraulic installation equipment. It is also compatible with HUCK® hydraulic installation equipment. The GB912 Powerunit operates on 90 - 100 psi. (6.2 - 6.9 bar), using 40 cfm @ 100 psi. (6.9 bar). The minimum hose recommended is ½" ID.

GB912-D Hydraulic Power Unit

GB912-D

The GB912-D Powerunit is a portable, air operated hydraulic power source designed to operate Gage Bilt hydraulic installation equipment. It is also compatible with HUCK® hydraulic installation equipment. The GB912-D Powerunit operates on 90 - 100 psi. (6.2-6.9 bar), using 40 cfm @ 100 psi. (6.9 bar). The minimum hose recommended is ½" ID.

GB947 Hydraulic Power Unit

GB947

Adjust Pull Pressure – Loosen nut, turn knob clockwise to increase pressure or counter clockwise to reduce pressure. Once correct pressure is achieved, tighten nut.
Adjust Return Pressure – Loosen nut, using a hex key turn screw clockwise to increase pressure or counter clockwise to reduce pressure. Once correct pressure is achieved, tighten nut.
GB940-220 Hydraulic Power Unit

GB940-220

The GB940 (115 volt single phase, alternating current) Hydraulic Powerunit is a light-weight, portable power source designed to operate on a wide range of hydraulic installation tools. The unit is electrically powered and delivers up to 10,000 psi (689.5 bar) working pressure with simple adjustable hydraulic outputs. The 24 volt remote control circuit, in the installation equipment, controls the pump output directional valve. Output pressures as shipped are: PULL 5,400-5,700 psi, (372.3 - 393.0 bar) RETURN 2,200-2,400 psi (151.7 - 165.5 bar).

The GB940-220 (230* volt, single phase, alternating current) Hydraulic Powerunit is a light-weight, portable power source designed to operate on a wide range of hydraulic installation tools.
GB808HVB Hydraulic Power Unit

GB808HVB

The GB808 series pneudraulic pump is designed to work in conjunction with Gage Bilt’s split handle (SHA) or split riveter (SRA) fastener installation tools. When the GB808 is properly configured with the correct installation tool, it is capable of installing 3/32” (2.38mm) - 1/4” (6.35mm) fasteners.
It is designed specifically to improve on the ergonomic and efficiency of fastener installation.
GB808V Hydraulic Power Unit

GB808V

The GB808V series pneudraulic pump is designed to work in conjunction with Gage Bilt’s split handle (SHA) or split riveter (SRA) fastener installation tools. When the GB808V is properly configured with the correct installation tool, it is capable of installing 3/32” (2.38mm) - 1/4” (6.35mm) fasteners.
It is designed specifically to improve on the ergonomic and efficiency of fastener installation.
GB808HVB-100 Hydraulic Power Unit

GB808HVB-100

The GB808 series pneudraulic pump is designed to work in conjunction with Gage Bilt’s split handle (SHA) or split riveter (SRA) fastener installation tools. When the GB808 is properly configured with the correct installation tool, it is capable of installing 3/32” (2.38mm) - 1/4” (6.35mm) fasteners.
It is designed specifically to improve on the ergonomic and efficiency of fastener installation.