GB2581 (Electric Actuator)

GB2581A (Air Actuator)

Hydraulic Rivet Tool
Hydraulic Rivet Tool GB 2581

GB2581/GB2581A Info:

APPLICATIONS

  • 5/32" - 3/8"
  • GP®
  • LGP®
  • NAS
  • BOM®
  • LD AVDELOK®
  • MAGNA-GRIP®

SPECIFICATIONS

  • GB2581 with Electric Actuator used with GB940 Powerunits
  • GB2581A with Air Actuator used with GB910 or GB912 Powerunits
  • Compatible with Huck® powerunits
  • WEIGHT: 6.00 lbs (3.0 kg)
  • HYD. PRESSURE REQ'D: 7,400 psi (510.2 bar) Pull
  • HYD. PRESSURE REQ'D: 3,200 psi (220.6 bar) Max Return
  • SETTING STROKE: 1.000" (25.4mm)
  • RATED PULL LOAD: 10,700 lbs (47.59 kN) @ 7,400 psi (510.2 bar)
  • STANDARD HYD. HOSE LENGTH: 12ft (3.65m)
  • * Custom hydraulic hose lengths are available

FASTENER TOOL CHART - GB2581/GB2581A

NOSE ASSEMBLY CHART - GB2581/GB2581A

Nose Assembly Selection Chart - GB2581

ASP® 2 ASP & ASP PF ASP FF & ASP F ASP-LC

DIA. STRAIGHT *OFFSET
13/64 ASP06-745B-23
ASP06-745B-48
ASP06-204D-27OS
ASP06-204D-37OS
17/64 ASP08-745B-23
ASP08-745B-48
ASP08-204D-27OS
ASP08-204D-37OS
21/64 ASP10-755-23
ASP10-755-48
ASP10-204D-27OS
ASP10-204D-37OS

BOM® BLIND OVERSIZE MANDREL

DIA. STRAIGHT *OFFSET
1/4 BOM08-755-23
5/16 BOM10-756-26
3/8 **BOM12-756A-26

COMMERCIAL LOCKBOLTS C6L® AVDELOK®

DIA. STRAIGHT *OFFSET
3/16 NAS06-745B-12
NAS06-755-48
NAS06-755-23
NAS06-204C-25OS
NAS06-204C-30OS
NAS06-204C-34OS
1/4 NAS08-745B-12
NAS08-755-48
NAS08-745B-12
NAS08-204C-25OS
NAS08-204D-30OS
NAS08-205A-31
NAS08-204C-34OS
5/16 LB10-745C-26
NAS10-756-26
NAS10-205D-31
3/8 LB12-756-26
NAS12-756-48
NAS12-205A-31

CONTAINER BOLT

DIA. STRAIGHT *OFFSET
3/8 HT12-756-23

FLOOR BOLT

DIA. STRAIGHT *OFFSET
5/16 FT10-353A-28

LGP® LIGHTWEIGHT GROOVE PROPORTION LOCKBOLTS

DIA. STRAIGHT *OFFSET
5/32 LGP05-2581-12
LGP05-2581-23
LGP05-2581-48
LGP05-204C-25OS
LGP05-204C-30OS
LGP05-204C-34OS
3/16 LGP06-2581-12
LGP06-2581-23
LGP06-2581-48
LGP06-204C-25OS
LGP06-204C-30OS
LGP06-204C-34OS
7/32 LGP07-745B-12
LGP07-755-23
LGP07-755-48
LGP07-204C-25OS
LGP07-204C-30OS
LGP07-204C-34OS
1/4 LGP08-2581-12
LGP08-2581-23
LGP08-2581-48
LGP08-204C-25OS
LGP08-204D-30OS
LGP08-204C-34OS
LGP08-205A-31
5/16 LGP10-2581-12
LGP10-2581-23
LGP10-2581-48
LGP10-205D-31
3/8 LGP12-745B-12
LGP12-756-26
LGP12-756-48
LGP12-205A-31

LOCKBOLT NAS SHEAR PULL TYPE NAS TENSION PULL TYPE & GROOVE PORPORTION NASS = NAS SHEAR NAST = NAS TENSION

DIA. STRAIGHT *OFFSET
5/32 NASS05-755-12
NAST05-2581-12
LGP05-2581-48
NASS05-204C-25OS
NAST05-204C-20OS
LGP05-204C-34OS
3/16 LGP06-2581-12
LGP06-2581-23
LGP06-2581-48
LGP06-204C-25OS
LGP06-204C-30OS
LGP06-204C-34OS
7/32 LGP07-745B-12
LGP07-755-23
LGP07-755-48
LGP07-204C-25OS
LGP07-204C-30OS
LGP07-204C-34OS
1/4 LGP08-2581-12
LGP08-2581-23
LGP08-2581-48
LGP08-204C-25OS
LGP08-204D-30OS
LGP08-204C-34OS
LGP08-205A-31
5/16 LGP10-2581-12
LGP10-2581-23
LGP10-2581-48
LGP10-205D-31
3/8 LGP12-745B-12
LGP12-756-26
LGP12-756-48
LGP12-205A-31

MULTI-GRIP LOCKBOLT

DIA. STRAIGHT *OFFSET
3/16 MG06-745-48
1/4 MG08-745-48
5/16 MG10-756-28
3/8 MG12-756-28

MULIT-GRIP STRUCTURAL BLIND RIVET

DIA. STRAIGHT *OFFSET
3/8 MGL12-353C-28

OVERSIZE STRUCTURAL RIVET

DIA. STRAIGHT *OFFSET
1/4 OS08-745-48
5/16 OS10-756-26
OS10-756-48
3/8 OS12-756A-26
OS12-756A-48

BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER M S90353S & U & M S90354S & U M S21140S & U & M S21141S & U M AXI-BOLT®, BACB30YY, YU, & YT

DIA. STRAIGHT *OFFSET
5/32 SB05-745C-23
SB05-745C-48
SB05-204D-27OS
SB05-204D-37OS
3/16 SB06-745B-23
SB06-745B-48
SB06-204D-27OS
SB06-204D-37OS
1/4 SB08-755-23
SB08-755-48
SB08-204D-27OS
SB08-204D-37OS
SB08-205A-35
5/16 SB10-756-28
SB10-756-48
SB10-205A-35
3/8 SB12-756-28
SB12-756-48
SB12-205A-35

BLIND BOLT (SINGLE ACTION) WITH DRIVE WASHER MS90353S & U & MS90354S & U MS21140S & U & MS21141S & U CR7000 SERIES BACB30YY, YU, & YT

DIA. STRAIGHT *OFFSET
5/32 UBB05-745C-23
UBB05-745C-48
UBB05-204D-27OS
UBB05-204D-37OS
3/16 UBB06-745B-23
UBB06-745B-48
UBB06-204D-27OS
UBB06-204D-37OS
1/4 UBB08-755-23
UBB08-755-48
UBB08-204D-27OS
UBB08-204D-37OS
UBB08-205A-35
5/16 UBB10-756-28
UBB10-756-48
UBB10-205A-35
3/8 UBB12-756-28
UBB12-756-48
UBB12-205A-35

FOOTNOTES

GAGE BILT CERTIFIES THE GB2581 WILL INSTALL THE ABOVE FASTENERS
*ALL OFFSET 204 SERIES NOSES REQUIRE 353204 ADAPTER WITH 258152 STROKE LIMITER AND 258157 RELIEF VALVE.
*ALL OFFSET 205 SERIES NOSES REQUIRE 353205 ADAPTER WITH 258153 STROKE LIMITER AND 258156 RELIEF VALVE.
** Repair Only
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES

CREDITS

ASP®, BOM ®, C6L®, AND LGP® ARE REGISTERED TRADEMARKS OF ARCONIC INC. AVDELOK® IS A REGISTERED TRADEMARK OF AVDEL UK LIMITED. MAXI-BOLT® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS