GB50 Info:
APPLICATIONS
- Aerospace and Commercial blind rivets
- Nut plate rivets
- Max Type
- All materials thru 3/32"
- Aluminum thru 1/8"
- Accepts Cherry® 9015 & 9055 nose assemblies
- Accepts Olympic screw-on nose assembly
DOWNLOADS
FASTENER TOOL CHART - GB50
The GB50 pneumatic installation tool is designed specifically for the most efficient installation of blind rivets. It will install aluminum fasteners through 5/32" diameter, and through 1/8" diameter fasteners in any material. It weighs only 1.8 lbs. (0.82 kg) and can be operated in one hand.
The GB50 Installation tool is 8.36" (212.4 mm) high, has a .740” (18.8mm) stroke and generates a minimum of 700 lbs. (3.11 kN) pull load at 90 psi (6.2 bar). It operates on 90 psi-100 psi (6.2 bar-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB50 does not exceed 81.5 dB(A) and consumes .29 SCF/cycle (8.21 L/cycle).
| Weight | 1.8 lbs. (0.82 kg) |
| Rated Pull Load | 700 lbs. (3.11 kN) |
| Stroke | .740” (18.8mm) |
| Width | 3.75 (95.3 mm) |
| Height | 8.36" (212.4 mm) |
| Noise Level | 81.5 dB (A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB50
Click Images For Enlarged View
NUT PLATE RIVETS MS20600 SERIES CCR244/264/274 MS/9SP/PT BACR15CC/CF/DA/DR
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3C-715B-43 | 3C-715A-54RA | 3C-715A-40OS |
| 1/8 | 4C-715B-43 | 4C-715A-54RA | 4C-715A-40OS |
| 5/32 2 | 5C-715B-43 | 5C-715A-54RA | 5C-715A-40OS |
'A' CODE NAS1398A, NAS1399A NAS1738A, NAS1739A
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3A-715B-43 | 3A-715A-54RA | 3A-715A-40OS |
| 1/8 | 4A-715B-43 | 4A-715A-54RA | 4A-715A-40OS |
| 5/32 2 | 5A-715B-43 | 5A-715A-54RA | 5A-715A-40OS |
BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | SMLS04-715B-43 | SMLS04-715A-54RA | SMLS04-715B-40OS |
| 5/32 2 | SMLS05-715B-43 | SMLS05-715A-54RA | SMLS05-715B-40OS |
MBC® NAS1715-1721
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | MBC04-715C-43 | ||
| 5/32 | MBC05-715C-43 | ||
| 3/16 | MBC06-715C-43 |
OPEN END NAIL RIVET
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 3 | 4N-715E-43 | 4N-715-54RA | 4N-715A-40OS |
| 5/32 2 | 5N-715E-43 | 5N-715-54RA | 5N-715A-40OS |
CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 | 4CEA-715E-43 | 4CEA-715-54RA | 4CEA-715-40OS |
| 5/32 | 5CEA-715E-43 | 5CEA-715-54RA | 5CEA-715-40OS |
CLOSED END NAIL RIVET (STEEL MANDREL)
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 | 4CES-715E-43 | 4CES-715-54RA | 4CES-715-40OS |
| 5/32 | 5CES-715E-43 | 5CES-715-54RA | 5CES-715-40OS |
FASTACK® AF5022 AF5055 S149A020
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3C-715B-43 | 3C-715A-54RA | 3C-715A-40OS |
| 1/8 | 4C-715B-43 | 4C-715A-54RA | 4C-715A-40OS |
| 5/32 | 5C-715B-43 | 5C-715A-54RA | 5C-715A-40OS |
SUPERTACK® AF5075 AF5076
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 3A-715B-43 | 3A-715A-54RA | 3A-715A-40OS |
| 5/32 | 4A-715B-43 | 4A-715A-54RA | 4A-715A-40OS |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB50 WILL INSTALL THE ABOVE FASTENERS | |
| 1) RIGHT ANGLE NOSE ASSEMBLYS MAY REQUIRE MORE THAN ONE PULL. | |
| 2) ALUMINUM ONLY. | |
| 3) ALUMINUM & STEEL ONLY. | |
| *ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL & COUNTERSUNK HEAD RIVETS | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| MBC® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE. FASTACK® AND SUPERTACK® ARE REGISTERED TRADEMARKS OF ALLFAST FASTENING SYSTEMS INC. |