GB735 Info:
APPLICATIONS
- Designed to install 3/16” & 1/4” Bobtail® Lockbolts
- Nose Assembly Sold Seperately
DOWNLOADS
The GB735 is a pneumatic-hydraulic tool designed specifically for the efficient installation of Bobtail® fasteners. It weighs 5.70 lbs. (2.6 kg) and can be operated in any position. It has a 1.135" (28.8 mm) fastener setting stroke and a rated pull load of 2,300 lbs. (10.2 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB735 installation tool operates on 90 to 100 psi (6.2 - 6.9 bar) Max. with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi (6.2 bar) of air pressure, the GB735 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet has a 1/4 - 18 female pipe thread to accept the users air hose fitting.
| Weight | 5.70 lbs. (2.6 kg) |
| Rated Pull Load | 2,300 lbs. (10.2 kN) |
| Stroke | 1.135" (28.8 mm) |
| Height | 12.48 (317.1 mm) |
| Width | 8.18 (207.7 mm) |
| Noise Level | 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB735
Click Images For Enlarged View
BOBTAIL®
| Fastener Size and Collar Material |
Recommended starting pressures | |||
|---|---|---|---|---|
| 43 PSI | 68 PSI | 85 PSI | 97 PSI | |
| 3/16" Grade 2 |
BOB06-735-20 | X | X | X |
| 1/4" 6061 Aluminum |
BOB08-735-20 BOB08-735-60 |
X | X | X |
| 1/4" Grade 2 |
X | X | X | BOB08-735-20 BOB08-735-60 |
| 1/4" 430 SS |
X | X | BOB08-735-20 BOB08-735-60 |
X |
| 5/16" 6061 Aluminum |
X | Contact GAGE BILT |
X | X |
NOTES
| *AIR REGULATOR REQUIRED NOT SUPPLIED WITH TOOL |
CREDITS
| BOBTAIL® IS A REGISTERED TRADEMARK OF HOWMET AEROSPACE |