GB703

Pneudraulic Rivet Tool

GB703 Info:

APPLICATIONS

  • Commercial Blind Rivets
  • All materials 3/32" thru 3/16"
  • Aluminum thru 1/4"

SPECIFICATIONS

  • One piece piston to prevent jamming
  • Accepts Cherry® H703 & H743 nose assemblies
  • WEIGHT: 4.5 lbs (2 kg)
  • HYD. PRESSURE REQ'D: 90-100 psi (6.2-6.9 bar)
  • SETTING STROKE: .780" (19.8 mm)
  • RATED PULL LOAD: 2,200 lbs
  • Includes Nose Assembly

FASTENER TOOL CHART - GB703

NOSE ASSEMBLY CHART - GB703

Nose Assembly Selection Chart - GB703

(For Non-Vacuum Tools Only)
(Sold Separately)

AVEX® (1624 PROTRUDING HEAD)

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 AV6-703-18 1 10141 30617 40605 AV6

AVEX (1624 COUNTERSUNKHEAD)

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 6C-703-18 1 10141-1 30617 40605 6C

KLAMP-TITE® (STRUCTURAL) RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 6KT-703-18 1 10263 30617 40605 6KT
1/4 8KT-743-24 2 - - - 8KT

MACHINE SCREW RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
5MM MS5M-703-18 1 10332 30617 40605 5MM

NAS1719, NAS1720, NAS1721 MBC®

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
1/8 MBC04-703-18 1 10251 30617 40307 MBC04
5/32 MBC05-703-18 1 10252 30617 40605 MBC05
3/16 MBC06-703-18 1 10253 30617 40605 MBC06

MILLIMETER SEAL PLUG

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
4MM 5N-703-18 1 10203 30617 40605 5N
5MM 6N-703-18 1 10204 30617 40605 6N

MONOBOLT® RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 MB06-734A-20 2,5 - - - MB06
1/4 3 MB08-734A-20 2,5 - - - MB08

NUTPLATE RIVET CCR244/264/274 BACR15DR MS20600

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/32 3NP-703-18 1 10231 30617 40307 3NP
1/8 5N-703-18 1 10203 30617 40605 5N

POP® OPEN END NAIL RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/32 3N-703-18 1 10201 30617 40307 3N
1/8 4N-703-18 1 10202 30617 40307 4N
5/32 5N-703-18 1 10203 30617 40605 5N
3/16 6N-703-18 1 10204 30617 40605 6N

POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/32 3N-703-18 1 10201 30617 40307 3N
1/8 4CEA-703-18 1 13471 30617 40307 4CEA
5/32 5CEA-703-18 1 13472 30617 40605 5CEA
3/16 6CEA-703-18 1 13473 30617 40605 6CEA

POP® CLOSED END NAIL RIVET (STEEL MANDREL)

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/32 3N-703-18 1 10201 30617 40307 3N
1/8 4CES-703-18 1 13475 30617 40307 4CES
5/32 5CES-703-18 1 13476 30617 40605 5CES
3/16 6CES-703-18 1 13477 30617 40605 6CES

PLASTIC SPLIT RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/32 3P-703-18 1, 6 10247-1 30617 40307 3P
1/8 4P-703-18 1, 6 10202-4 30617 40307 4P
5/32 5P-703-18 1, 6 10203-2 30617 40605 5P
3/16 6P-703-18 1, 6 10167 30617 40605 6P
1/4 8P-743-24 2, 6 - - - 8P

SCREW RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 6SR-703-18 1 13506 30617 40605 6SR

T RIVET®

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 6T-703-18 1 10209 30617 40605 6T
1/4 3 8T-743-24 2 - - - 8T

TLR® RIVET

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
1/4 8TLR-743-24 2 - - - 8TLR

COUNTERSUNK HEAD MAGNA-LOK® & SERRATED STEM STRUCTURAL RIVETS

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 C6-734A-20 2,5 - - - C6
1/4 4 C8-734A-20 2,5 - - - C8

PROTRUDING HEAD MAGNA-LOK® & SERRATED STEM STRUCTURAL RIVETS

DIA. NOSE ASSEMBLY NOSE TIP 1 JAW FOLLOWER DESIGNATION
3/16 PH6-734A-20 2,5 - - - PH6
1/4 4 PH8-734A-20 2,3,5 - - - PH8

FOOTNOTES

1) YOU CAN CHANGE THE 703-18 NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP 1 SHOWN AND USING APPROPRIATE FOLLOWER SHOWN.
2) NOSE ASSEMBLIES WITH A 743-24 AND 734A-20 DESIGNATION, I.E. 8N-743-24, MUST BE ORDERED AS COMPLETE NOSE ASSEMBLY.
3) ALUMINUM RIVET STEEL MANDREL ONLY (100 PSI REQUIRED FOR ALL 1/4" STEEL RIVETS).
4) 1/4" ALUMINUM ONLY.
5) NOSE ASSEMBLIES WITH A 734A DESIGNATION, I.E. PH6-734A-20, ARE FOR SERRATED STEM RIVETS ONLY. IF YOU ARE PULLlING BOTH SMOOTH AND SERRATED STEM RIVETS YOU MUST ORDER THE NOSE ASSEMBLY WITH A 743 DESIGNATION, I.E. MGL06-743-24.
6) MAY REQUIRE MORE THAN (1) PULL. GAGE BILT RECOMMENDS GB734 TOOL.
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES

CREDITS

AVEX®, KLAMP-TITE®, TLR®, AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. T RIVET® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. MAGNA-LOK® IS A REGISTERED TRADEMARK OF ARCONIC INC.