GB756SH Info:
DOWNLOADS
The GB756SH is a pneudraulic split handle installation tool designed specifically for the efficient installation of blind, lockbolt and Magna- Grip® fasteners thru 3/8" diameter.
The handle weighs 4.1 lbs. (1.9 kg) and can be operated in any position. It has a .960" (24.4mm) fastener setting stroke and a rated pull load of 10,000 lbs. (44.5kN).
The GB756SH installation tool operates on 90 to 100 psi (6.2 - 6.9 bar) Max. of air pressure. At 90 psi. (6.2 bar) of air pressure, the GB756SH does not exceed 94.3 dB(A) and consumes .29 SCF/cycle (8.21 L/cycle).
| Total Weight | 15.9 lbs. (7.2 kg). |
| Hand Weight | 4.1 lbs. (1.9 kg) |
| Rated Pull Load | 10,000 lbs. (44.5kN) |
| Stroke | .960" (24.4mm) |
| Noise Level | 94.3 dB(A) Peak |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB756SH
ASP® 2 ASP & ASP PF ASP FF & ASP F ASP-LC and MAF
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 13/64 | ASP06-745C-23 ASP06-745C-48 |
***ASP06-751B-54RA | ASP06-27OSSG ASP06-37OSSG |
| 17/64 | ASP08-745B-23 ASP08-745B-48 |
ASP08-27OSSG ASP08-37OSSG |
|
| 21/64 | ASP10-755-23 ASP10-755-48 |
ASP10-27OSSG ASP10-37OSSG |
BOM®
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/4 | BOM08-755A-23 | ||
| 5/16 | BOM10-756-26 |
COMMERCIAL LOCKBOLTS
C6L®
AVDELOK®
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | NAS06-2581-12 NAS06-2581-48 NAS06-2581-23 |
NAS06-25OSSG NAS06-30OSSG |
|
| 1/4 | NAS08-2581-12 NAS08-2581-48 NAS08-2581-23 |
NAS08-25OSSG NAS08-30OSSG NAS08-34OSSG |
|
| 5/16 | LB10-745C-26 NAS10-2581-48 |
NAS10-208C-31 | |
| 3/8 | LB12-756-26 NAS12-756-48 |
NAS12-208A-31 |
CONTAINER BOLT(R 12) HLPP, HLPM, HLPE, HLPS HLPSC & HLPSM
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/8 | HT12-756-23 |
FLOOR BOLT
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/16 | FT10-353A-28 |
LGP® LOCKBOLT
LGPL2SC-V BACB30VM
LGPL18SC-V BACB30XT
LGPL4SC-V ABS0548
LGPL2SP-V BACB30VN
LGPL4SP-V ASNA2392
LGPL8SC-V BACB30WD
LGPL9SC-V BACB30WB
LGPL9SP-V BACB30VY
BACB31N BACB31P
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | LGP05-2581-12 LGP05-2581-23 LGP05-2581-48 |
LGP05-25OSSG LGP05-30OSSG LGP05-34OSSG |
|
| 3/16 | LGP06-2581-12 LGP06-2581-23 LGP06-2581-48 |
LGP06-25OSSG LGP06-30OSSG LGP06-34OSSG |
|
| 7/32 | LGP07-2581-12 LGP07-755-23 LGP07-755-48 |
LGP07-25OSSG LGP07-30OSSG LGP07-34OSSG |
|
| 1/4 | LGP08-2581-12 LGP08-2581-23 LGP08-2581-48 |
LGP08-25OSSG LGP08-30OSSG LGP08-34OSSG |
|
| 5/16 | LGP10-2581-12 LGP10-2581-23 LGP10-2581-48 |
LGP10-208C-31 | |
| 3/8 | LGP12-745B-12 LGP12-756-26 LGP10-2581-48 |
LGP12-208A-31 |
MLGP® (MILLIMETER) LOCKBOLT
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 4mm | MLGP4-2581-12 MLGP4-2581-23 MLGP4-2581-48 |
MLGP4-25OSSG MLGP4-30OSSG MLGP4-34OSSG |
|
| 5mm | MLGP5-2581-12 MLGP5-2581-23 MLGP5-2581-48 |
MLGP5-25OSSG MLGP5-30OSSG MLGP5-34OSSG |
|
| 6mm | MLGP6-2581-12 MLGP6-2581-23 MLGP6-2581-48 |
MLGP6-25OSSG MLGP6-30OSSG MLGP6-34OSSG |
|
| 8mm | MLGP8-2581-12 MLGP8-2581-23 MLGP8-2581-48 |
MLGP8-25OSSG MLGP8-30OSSG MLGP8-34OSSG |
|
| 10mm | MLGP10-2581-23 MLGP10-2581-48 |
MLGP10-208A-31 |
NAS and GP® SHEAR/TENSION LOCKBOLTS BACB30TY BACB30UA BACB30TZ BACB30UB BACB30DY BACB30GX BACB30DX BACB30GP BACB30GO BACB30GY BACB30GW
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | NASS05-2581-12 NAST05-2581-12 NASS05-2581-23 NAST05-2581-23 NASS05-2581-48 NAST05-2581-48 |
NASS05-25OSSG NAST05-25OSSG NASS05-30OSSG NAST05-30OSSG NASS05-34OSSG NAST05-34OSSG |
|
| 3/16 | NAS06-2581-12 NAS06-2581-23 NAS06-2581-48 |
NAS06-25OSSG NAS06-30OSSG NAS06-34OSSG |
|
| 1/4 | NAS08-2581-12 NAS08-2581-23 NAS08-2581-48 |
NAS08-25OSSG NAS08-30OSSG NAS08-34OSSG NAS08-208A-31 |
|
| 5/16 | NAS10-2581-12 NAS10-2581-23 NAS10-2581-48 |
NAS10-208C-31 | |
| 3/8 | NAS12-745B-12 NAS12-756-26 NAS12-756-48 |
NAS12-208A-31 |
MGP®
(MILLIMETER)
LOCKBOLT
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 4mm | MGP4-2581-23 MGP4-2581-48 |
MGP4-25OSSG MGP4-30OSSG MGP4-34OSSG |
|
| 5mm | MGP5-2581-23 MGP5-2581-48 |
MGP5-25OSSG MGP5-30OSSG MGP5-34OSSG |
|
| 6mm | MGP6-2581-23 MGP6-2581-48 |
MGP6-25OSSG MGP6-30OSSG MGP6-34OSSG |
|
| 8mm | MGP8-2581-23 MGP8-2581-48 |
||
| 10mm | MGP10-2581-23 MGP10-2581-48 |
MGP10-208A-31 |
MAGNA-GRIP®, MULTI-GRIP,
MAXLOK® LOCKBOLTS
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | MG06-745-24 MG06-745-48 |
||
| 1/4 | MG08-745-24 MG08-745-48 |
||
| 5/16 | MG10-756-28 | ||
| 3/8 | MG12-756-28 |
MAGNA-LOK®, MAGNA-BULB®, &
HEMLOK® COUNTER SUNK AND
PROTRUDING HEAD SERRATED
STEM STRUCTURAL RIVETS
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/4 | **MGL08-752A-21 | ||
| 5/16 | MGL10-353-28 | ||
| 3/8 | MGL12-353C-28 |
OVERSIZE
STRUCTURAL
RIVET
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/4 | OS08-353A-48 | ||
| 5/16 | OS10-756-26 OS10-756-48 |
||
| 3/8 | OS12-756A-26 OS12-756A-48 |
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
MAXI-BOLT®, BACB30YY, YU, & YT
CR7000 SERIES
BLIND BOLT (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | SB05-745C-23 SB05-745C-48 |
***SB05-751C-54RA | SB05-27OSSG SB05-37OSSG |
| 3/16 | SB06-745B-23 SB06-745B-48 |
***SB06-751B-54RA | SB06-27OSSG SB06-37OSSG |
| 1/4 | SB08-755-23 SB08-755-48 |
****SB08-713A-58RA | SB08-27OSSG SB08-37OSSG |
| 5/16 | SB10-756-28 SB10-756-48 |
SB10-208A-32 | |
| 3/8 | SB12-756-28 SB12-756-48 |
SB12-208A-32 |
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
MAXI-BOLT®, BACB30YY, YU, & YT
CR7000 SERIES
BLIND BOLT (SINGLE ACTION)
WITH DRIVE WASHER
| DIA. | STRAIGHT | **RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | UBB05-745C-23 UBB05-745C-48 |
***UBB05-751C-54RA | UBB05-27OSSG UBB05-37OSSG |
| 3/16 | UBB06-745B-23 UBB06-745B-48 |
***UBB06-751B-54RA | UBB06-27OSSG UBB06-37OSSG |
| 1/4 | UBB08-755-23 UBB08-755-48 |
****UBB08-713A-58RA | UBB08-27OSSG UBB08-37OSSG |
| 5/16 | UBB10-756-28 UBB10-756-48 |
UBB10-208A-32 | |
| 3/8 | UBB12-756-28 UBB12-756-48 |
UBB12-208A-32 |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB756SH WILL INSTALL THE ABOVE FASTENERS View our nose assembly information (data sheets) |
|
| *ALL OFFSET "OSSG" SERIES NOSES REQUIRE 353206-1 ADAPTER WITH 756157 STROKE LIMITER. *ALL OFFSET 208 SERIES NOSES REQUIRE 745208 ADAPTER & 756153 STROKE LIMITER **NOSE REQUIRES 745751 ADAPTER |
|
| **-54RA RIGHT ANGLE SERIES NOSES REQUIRE 745751 ADAPTER WITH 756155 STROKE LIMITER. | |
| ****-58RA RIGHT ANGLE SERIES NOSES REQUIRE 745751 ADAPTER WITH 756152 STROKE LIMITER. | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| ASP®, BOM®, LGP®, C6L®, GP®, M LGP®, MGP®, MAGNA-LOK®, MAGNA-BULB® AND MAGNA-GRIP® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. AVBOLT®, AVDELOK®, HEMLOK® AND MAXLOK® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. MAXI-BOLT® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS. |
|---|