GB752SR Info:
DOWNLOADS
The GB752SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.00 lbs. (.91kg).
The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a .500 (12.7 mm) fastener setting stroke. The GB752SR split handle installation tool operates on 90 - 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB752SR does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
| Total Weight | 7.00 lbs. (3.18 kg) |
| Hand Weight | 2.00 lbs. (.91kg). |
| Rated Pull Load | 3,500 lbs. (15.6 kN |
| Stroke | .500” (12.7 mm) |
| Noise Level | Less than 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB752SR
COMMERCIAL LOCKBOLTS
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/16 | LB06-722-20 LB06-722-60 |
||
| 1/4 | LB08-722-20 LB08-722-60 |
MULTI-GRIP LOCKBOLTS
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/16 | MG06-722-20 MG06-722-60 |
||
| 1/4 5 | MG08-722-20 MG08-722-60 |
BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXIBOLT®, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | SB04-752C-20 SB04-752C-45 |
SB04-751C-54RA | SB04-752B-43OS |
| 5/32 | SB05-752C-20 SB05-752C-45 SB05-752C-80 |
SB05-751C-54RA | SB05-752A-43OS |
| 3/16 | SB06-752B-20 SB06-752B-45 SB06-752B-80 |
SB06-751B-54RA 6 | SB06-27OSSG SB06-37OSSG |
BLIND BOLT (SINGLE ACTION) WITH DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXIBOLT®, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | UBB04-752C-20 UBB04-752C-45 |
UBB04-751C-54RA | UBB04-752B-43OS |
| 5/32 | UBB05-752C-20 UBB05-752C-45 UBB05-752C-80 |
UBB05-751C-54RA | UBB05-752B-43OS |
| 3/16 | UBB06-752B-20 UBB06-752B-45 UBB06-752B-80 |
UBB06-751B-54RA | UBB06-27OSSG UBB06-37OSSG |
EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU MAXIBOLT® PLUS
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 5/32 | UAB05-752C-20 UAB05-752C-45 |
UAB05-751C-54RA | UAB05-752B-43OS |
| 3/16 | UAB06-752B-20 UAB06-752B-45 |
UAB06-751B-54RA 6 | UAB06-752B-43OS |
UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | SMLS04-752C-20 SMLS04-752C-45 |
SMLS04-751C-54RA | SMLS04-752B-43OS |
| 5/32 | SMLS05-752C-20 SMLS05-752C-45 |
SMLS05-751C-54RA | SMLS05-752B-43OS |
| 3/16 | SMLS06-752B-20 SMLS06-752B-45 |
SMLS06-751C-54RA | SMLS06-752B-43OS |
| 1/4 | SMLS08-713-20 SMLS08-713-45 |
SMLS08-713B-58RA | SMLS08-27OSSG SMLS08-37OSSG |
UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 5/32 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 1/4 | UBR08-713-20 UBR08-713-45 |
UBR08-713B-58RA | UBR08-27OSSG UBR08-37OSSG |
"A" CODE NAS1398A & NAS1399A
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/32 | 3A-352B-25 | 3A-751C-54RA | |
| 1/8 | 4A-752C-20 4A-752C-45 |
4A-751C-54RA | 4A-752B-43OS |
| 5/32 | 5A-752C-20 5A-752C-45 |
5A-751C-54RA | 5A-752B-43OS |
| 3/16 | 6A-752B-20 6A-752B-45 |
6A-751C-54RA | 6A-752B-43OS |
| 1/4 | SMLS08-713-20 | SMLS08-713B-58RA | SMLS08-27OSSG SMLS08-37OSSG |
NUT PLATE RIVETS CCR244/264/274 BACR15DR MS20600
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/32 | 3NP-751-23 3NP-352-61 |
3NP-751B-54RA | 3NP-751A-43OS |
| 1/8 | 5N-751-23 5N-352-61 |
45N-751B-54RA | 5N-751A-43OS |
CHERRYMAX®, CHERRYMAX® 'AB', (FOR 1/4" ALUMINUM CHERRYMAX® 'AB' USE SMLS08) BACR15FR/FP, BACR15GF/GK
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | 04MAX-752-23VT (VT-Vacuum Tube only) |
||
| 5/32 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 1/4 | 08MAX-752B-20 08MAX-752B-45 |
**08MAX-27OSSG **08MAX-37OSSG |
ASP® ASP 2, ASP PF, ASP 4 FF, ASP 2 F, ASP 2 LC
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| `13/64 | ASP06-752C-20 ASP06-752C-45 |
ASP06-751C-54RA | ASP06-752B-43OS |
| 17/64 | ASP08-752B-20 ASP08-752B-45 |
ASP08-752B-43OS |
STANDARD MBC® NAS1719, NAS1720 NAS1721
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | MBC04-752C-20 MBC04-752C-45 |
MBC04-751C-54RA | MBC04-752C-43OS |
| 5/32 | MBC05-752C-20 MBC05-752C-45 |
MBC05-751C-54RA | MBC05-752C-43OS |
| 3/16 | MBC06-752B-20 MBC06-752B-45 |
MBC06-751C-54RA | MBC06-752C-43OS |
MBC® LOCK CREATOR NAS1719X(L), NAS1720X(L) NAS1721X(L)
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 1/8 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 5/32 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
GROUND STUD, M83454 & BACS53B 4
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 8/32 | GS8-752B-20 GS8-752B-45 |
GS8-751C-54RA | GS8-752B-43OS |
| 10/32 | GS10-752B-20 GS10-752B-45 |
GS10-752A-54RA | GS10-752B-43OS |
POP® OPEN END NAIL RIVET
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA | 3N-751A-43OS |
| 1/8 | 4N-751-23 4N-352-61 |
45N-751B-54RA | 4N-751A-43OS |
| 5/32 | 5N-751-23 5N-352-61 |
45N-751B-54RA | 5N-751A-43OS |
| 3/16 | 6N-751-23 6N-352-61 |
6N-751C-54RA | 6N-751A-43OS |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA | 3N-751A-43OS |
| 1/8 | 4CEA-751-23 4CEA-352-61 |
45CEA-751B-54RA | 4CEA-751-43OS |
| 5/32 | 5CEA-751-23 5CEA-352-61 |
45CEA-751B-54RA | 5CEA-751-43OS |
| 3/16 | 6CEA-751-23 6CEA-352-61 |
6CEA-751C-54RA | 6CEA-751-43OS |
POP® CLOSED END NAIL RIVET (STEEL MANDREL)
| DIA. | STRAIGHT | *RIGHT ANGLE 1 | **OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA | 3N-751A-43OS |
| 1/8 | 4CES-751-23 4CES-352-61 |
4CES-751B-54RA | 4CES-751-43OS |
| 5/32 | 5CES-751-23 5CES-352-61 |
5CES-751B-54RA | 5CES-751-43OS |
| 3/16 | 6CES-751-23 6CES-352-61 |
6CES-751C-54RA | 6CES-751-43OS |
FOOTNOTES
|
GAGE BILT CERTIFIES THE GB752 WILL INSTALL THE ABOVE FASTENERS See our Nose Assembly information (data sheets) |
|
| *ALL RIGHT ANGLE NOSES REQUIRE 752142 STROKE LIMITER. |
|
| **ALL OFFSET "OSSG" SERIES NOSES REQUIRE 731206 ADAPTER (NO STROKE LIMITER REQUIRED). OPTIONAL 751206-1 ADAPTER (NO STROKE LIMITER REQUIRED) | |
| 1) RIGHT ANGLE NOSE ASSEMBLY'S MAY REQUIRE MORE THAN ONE PULL. | |
| 2) INSTALLS 1/8, 5/32 & 3/16 DIAMETERS | |
| 3) INSTALLS 5/32 & 3/16 DIAMETERS | |
| 4) BACS53B -10 ONLY | |
| 5) TWO PULLS MAY BE REQUIRED FOR 1/4" DIAMETER MULTI-GRIP LOCKBOLTS | |
| 6) THESE NOSES FOR LIGHT DUTY / REPAIR ONLY. CONSULT GAGE BILT FOR HIGH PRODUCTION APPLICATIONS | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES GB752SR MODELS MUST USE -45 LENGTH OR LONGER ON ALL 752 STYLE NOSES |
|
CREDITS
| CHERRYMAX®, T RIVET®, MAXIBOLT® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS. AVEX®, KLAMP-TITE®, TLR®, HEMLOK® AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. ASP®, MAGNA-LOK® UNIMATIC® AND MAGNA-BULB® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. BULB-TITE® IS A REGISTERED TRADEMARK OF GESIPA FASTENERS USA, INC. ULTRA-GRIP® AND POP® ARE REGISTERED TRADEMARKS OF EMHART TEKNOLOGIES. |
|---|