GB751SR Info:
DOWNLOADS
The GB751SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 1.75 lbs. (.79 kg). The entire split handle installation tool weighs 6.75 lbs. (3.06 kg). It has a .780” (19.81 mm) fastener setting stroke.
The GB751SR split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) of air pressure providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB751SR does not exceed 81.5 dB(A) and consumes .30 SCF/ cycle (8.50 L/cycle).
| Total Weight | 6.75 lbs. (3.06 kg) |
| Hand Weight | 1.75 lbs. (.79 kg) |
| Rated Pull Load | 2,200 lbs. (9.8 kN |
| Stroke | .780” (19.8 mm) |
| Noise Level | 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB751SR
Click Images For Enlarged View
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
MAXIBOLT®, BACB30YY, YU, & YT
CR7000 SERIES
BLIND BOLT (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | SB04-752C-20 SB04-752C-45 SB04-752C-80 |
SB04-751C-54RA | SB04-752B-43OS |
| 5/32 | SB05-752C-20 SB05-752C-45 SB05-752C-80 |
SB05-751C-54RA | SB05-752A-43OS |
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
MAXIBOLT®, BACB30YY, YU, & YT
CR7000 SERIES
BLIND BOLT (SINGLE ACTION)
WITH DRIVE WASHER
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | UBB04-752C-20 UBB04-752C-80 UBB04-752C-45 |
UBB04-751C-54RA | UBB04-752B-43OS |
| 5/32 | UBB05-752C-20 UBB05-752C-45 UBB05-752C-80 |
UBB05-751C-54RA | UBB05-752B-43OS |
EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU MAXIBOLT® PLUS
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 5/32 | UAB05-752C-20 UAB505-752C-45 |
UAB05-751C-54RA | UAB05-752B-43OS |
NAS1900 S & U SERIES
UNIMATIC® BLIND RIVET
(SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | SMLS04-752C-20 SMLS04-752C-45 |
SMLS04-751C-54RA | SMLS04-752B-43OS |
| 5/32 | SMLS05-752C-20 SMLS05-752C-45 |
SMLS05-751C-54RA | SMLS05-752B-43OS |
| 3/16 | SMLS06-752B-20 SMLS06-752B-45 |
SMLS06-751C-54RA | SMLS06-752B-43OS |
| 1/4 3 | SMLS08-713-20 SMLS08-713-45 |
SMLS08-713B-58RA 5 | SMLS08-752B-43OS 3 |
NAS1900 S & U SERIES
UNIMATIC® BLIND RIVET
(SINGLE ACTION)
WITH DRIVE WASHER
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 5/32 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456UBR-751A-21 2 456UBR-751A-61 2 |
456UBR-751D-54RA 2 | 456MAX-731-43OS 2 |
| 1/4 3 | UBR08-713-20 UBR08-713-45 |
UBR08-713B-58RA 5 | UBR08-27OSSG 6 UBR08-37OSSG 6 |
"A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3A-352B-25 | 3A-751C-54RA | 3A-752B-43OS |
| 1/8 | 4A-752C-20 4A-752C-45 |
4A-751C-54RA | 4A-752B-43OS |
| 5/32 | 5A-752C-20 5A-752C-45 |
5A-751C-54RA | 5A-752B-43OS |
| 3/16 | 6A-752B-20 6A-752B-45 |
6A-751C-54RA | 6A-752B-43OS |
NUT PLATE RIVETS MS20600 SERIES CCR244/264/274 MS/9SP/PT BACR15CC/CF/DA/DR
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3NP-751-23 3NP-352-61 |
3NP-751B-54RA | 3NP-751A-43OS |
| 1/8 | 5N-751-23 5N-352-61 |
45N-751B-54RA | 5N-751A-43OS |
CHERRYMAX®,
CHERRYMAX® 'AB',
MBC® LOCK CREATOR
BACR15FR/FP, BACR15GF/GK
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 5/32 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
ASP® ASP 2, ASP PF, ASP 2 F, ASP 2 LC, ASP 4 FF, ASP FF, ASP F, ASP-LC and MAF
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 13/64 | ASP06-752C-20 ASP06-752C-45 |
ASP06-751B-54RA | ASP06-752B-43OS |
STANDARD MBC® NAS1719, NAS1720 NAS1721
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | MBC04-752C-20 MBC04-752C-45 |
MBC04-751C-54RA | MBC04-752C-43OS |
| 5/32 | MBC05-752C-20 MBC05-752C-45 |
MBC05-751C-54RA | MBC05-752C-43OS |
| 3/16 | MBC06-752B-20 MBC06-752B-45 |
MBC06-751C-54RA | MBC06-752C-43OS |
MBC® LOCKCREATOR NAS1719X(L), NAS1720X(L) NAS1721X(L)
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 5/32 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
| 3/16 | 456MAX-751-23 2 456MAX-751A-61 2 |
456MAX-751D-54RA 2 | 456MAX-731-43OS 2 |
GROUND STUD, M83454 & BACS53B 4
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 8/32 | GS8-752C-20 GS8-752C-45 |
GS8-751C-54RA | GS8-752B-43OS |
| 10/32 | GS10-752B-20 GS10-752B-45 |
GS10-752A-54RA | GS10-752C-43OS |
POP® OPEN END NAIL RIVET
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA | 3N-751A-43OS |
| 1/8 | 4N-751-23 4N-352-61 |
45N-751B-54RA | 4N-751A-43OS |
| 5/32 | 5N-751-23 5N-352-61 |
45N-751B-54RA | 5N-751A-43OS |
| 3/16 | 6N-751-23 6N-352-61 |
6N-751C-54RA | 6N-751A-43OS |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA | 3N-751A-43OS |
| 1/8 | 4CEA-751-23 4CEA-352-61 |
4CEA-751B-54RA | 4CEA-751-43OS |
| 5/32 | 5CEA-751-23 5CEA-352-61 |
5CEA-751B-54RA | 5CEA-751-43OS |
| 3/16 | 6CEA-751-23 6CEA-352-61 |
6CEA-751C-54RA | 6CEA-751-43OS |
POP® CLOSED END NAIL RIVET (STEEL MANDREL)
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-751-23 3N-352-61 |
3N-751B-54RA S | 3N-751A-43O |
| 1/8 | 4CES-751-23 4CES-352-61 |
4CES-751B-54RA | 4CES-751-43OS |
| 5/32 | 5CES-751-23 5CES-352-61 |
5CES-751B-54RA | 5CES-751-43OS |
| 3/16 | 6CES-751-23 6CES-352-61 |
6CES-751C-54RA | 6CES-751-43OS |
FASTACK® AF5022 AF5055 S149A020
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 4C-752C-20 4C-752C-45 |
4C-751C-54RA | 4C-751A-43OS |
| 5/32 | 5C-752C-20 5C-752C-45 |
5C-751C-54RA | 5C-751A-43OS |
| 3/16 | 6C-752B-20 6C-752B-45 |
6C-751C-54RA | 6C-751A-43OS |
SUPERTACK® AF5075 AF5076
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 3A-352B-25 | 3A-751C-54RA | 3A-752B-43OS |
| 5/32 | 4A-752C-20 4A-752C-45 |
4A-751C-54RA | 4A-752B-43OS |
| 3/16 | 5A-752C-20 5A-752C-45 |
5A-751C-54RA | 5A-752B-43OS |
| 1/4 | 6A-752B-20 6A-752B-45 |
6A-751C-54RA | 6A-752B-43OS |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB751 WILL INSTALL THE ABOVE FASTENERS | |
| 1) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN ONE PULL. | |
| 2) INSTALLS 1/8", 5/32" & 3/16" DIAMETERS. | |
| 3) ALUMINUM ONLY. | |
| 4) INSTALLS 5/32", 3/16" & 1/4" DIAMETERS. | |
| 5) BACS53B -10 ONLY | |
| 6) THESE NOSES FOR LIGHT DUTY / REPAIR ONLY. CONSULT GAGE BILT FOR HIGH PRODUCTION APPLICATIONS. | |
| 7) ALL "OSSG" NOSE ASSEMBLIES REQUIRE THE 713206 ADAPTER. (NO STROKE LIMTER REQUIRED). OPTIONAL 751206-1 ADAPTER (NO STROKE LIMITER REQUIRED). | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| UNIMATIC® AND ASP® ARE REGISTERED TRADEMARKSOF HOWMET AEROSPACE. CHERRYMAX®, MAXIBOLT® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE. FASTACK® AND SUPERTACK® ARE REGISTERED TRADEMARKS OF ALLFAST FASTENING SYSTEMS INC. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. |