GB745SH Info:
DOWNLOADS
The GB745SH is a pneumatic-hydraulic split handled installation tool designed specifically for the efficient installation of blind fasteners, lockbolts and MAGNA-GRIP® fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 10.50 lbs. (4.76 kg). It has a .620” (15.75 mm) fastener setting stroke.
The GB745SH split handled installation tool operates on 90 to 100 psi (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB745SH does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
| Total Weight | 10.50 lbs. (4.76 kg) |
| Hand Weight | 2.25 lbs. (1.02 kg) |
| Rated Pull Load | 6,300 lbs. (28.02 kN) |
| Stroke | .620” (15.75 mm) |
| Noise Level | Less than 80 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB745SH
'A' CODE NAS1398 & NAS1399 'A'
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/8 | 4A-745C-23 4A-745C-48 |
4A-752B-43OS 5 |
| 5/32 | 5A-745C-23 5A-745C-48 |
5A-752B-43OS 5 |
| 3/16 | 6A-745B-23 6A-745B-48 |
6A-752B-43OS 5 |
| 1/4 | SMLS08-755-23 SMLS08-755-48 |
SMLS08-27OSSG SMLS08-37OSSG |
ASP® 2 ASP® & ASP PF ASP FF & ASP F ASP-LC & MAF
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 13/64 | ASP06-745C-23 ASP06-745C-48 |
ASP06-752B-43OS 5 |
| 17/64 | ASP08-745B-23 ASP08-745B-48 |
ASP08-752B-43OS 5 |
| 21/64 | ASP10-755-23 ASP10-755-48 |
ASP10-27OSSG ASP10-37OSSG |
BOM® AVBOLT®
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/4 | BOM08-755A-23 |
COMMERCIAL LOCKBOLTS C6L® AVDELOK®
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 3/16 | NAS06-2581-12 NAS06-2581-23 NAS06-2581-48 |
NAS06-25OSSG NAS06-30OSSG NAS06-34OSSG |
| 1/4 | NAS08-2581-12 NAS08-2581-23 NAS08-2581-48 |
NAS08-25OSSG NAS08-30OSSG NAS08-34OSSG |
| 5/16 6 | LB10-756-26 NAS10-2581-48 |
NAS10-208C-31 |
| 3/8 2 | LB12-756-26 NAS12-756-48 |
NAS12-208A-31 |
CONTAINER BOLT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 3/8 | HT12-756-23 |
FLOOR BOLT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/16 | FT10-353A-28 |
LGP® LGPL2SC-V LGPL18SC-V LGPL4SC-V LGPL2SP-V LGPL4SP-V LGPL8SC-V LGPL9SC-V LGPL9SP-V BACB31N BACB30VM BACB30XT ABS0548 BACB30VN ASNA2392 BACB30WD BACB30WB BACB30VY BACB31P
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/32 | LGP05-2581-12 LGP05-2581-23 LGP05-2581-48 |
LGP05-25OSSG LGP05-30OSSG LGP05-34OSSG |
| 3/16 | LGP05-204C-34OS LGP06-2581-23 LGP06-2581-48 |
LGP06-25OSSG LGP06-30OSSG LGP06-34OSSG |
| 7/32 | LGP07-2581-12 LGP07-755-23 LGP07-755-48 |
LGP07-25OSSG LGP07-30OSSG LGP07-34OSSG |
| 1/4 | LGP08-2581-12 LGP08-2581-23 LGP08-2581-48 |
LGP08-25OSSG LGP08-30OSSG LGP08-34OSSG |
| 5/16 | LGP10-2581-12 LGP10-2581-23 LGP10-2581-48 |
LGP10-208C-31 |
MLGP® (MILLIMETER) LOCKBOLT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 4MM | MLGP4-2581-12 MLGP4-2581-23 MLGP4-2581-48 |
MLGP4-25OSSG MLGP4-30OSSG MLGP4-34OSSG |
| 5MM | MLGP5-2581-12 MLGP5-2581-23 MLGP5-2581-48 |
MLGP5-25OSSG MLGP5-30OSSG MLGP5-34OSSG |
| 6MM | MLGP6-2581-12 MLGP6-2581-23 MLGP6-2581-48 |
MLGP6-25OSSG MLGP6-30OSSG MLGP6-34OSSG |
| 8MM | MLGP8-2581-12 MLGP8-2581-23 MLGP8-2581-48 |
NAS and GP® SHEAR/TENSION LOCKBOLTS BACB30UA BACB30UB BACB30GX BACB30GP BACB30GY BACB30TY BACB30TZ BACB30DY BACB30DX BACB30GO BACB30GW
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/32 | NASS05-2581-12 NAST05-2581-12 NASS05-2581-23 NAST05-2581-23 NASS05-2581-48 NAST05-2581-48 |
NASS05-25OSSG NAST05-25OSSG NASS05-30OSSG NAST05-30OSSG NASS05-34OSSG NAST05-34OSSG |
| 3/16 | NAS06-2581-12 NAS06-2581-23 NAS06-2581-48 |
NAS06-25OSSG NAS06-30OSSG NAS06-34OSSG |
| 1/4 | NAS08-2581-12 NAS08-2581-23 NAS08-2581-48 |
NAS08-25OSSG NAS08-30OSSG NAS08-34OSSG |
| 5/16 | NAS10-2581-12 NAS10-2581-23 NAS10-2581-48 |
NAS10-208C-31 |
| 3/8 1 | NAS12-745B-12 NAS12-756-26 NAS12-756-48 |
NAS12-208A-31 |
MGP® (MILLIMETER) LOCKBOLT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 4MM | MGP4-2581-23 MGP4-2581-48 |
MGP4-25OSSG MGP4-30OSSG MGP4-34OSSG |
| 5MM | MGP5-2581-23 MGP5-2581-48 |
MGP5-25OSSG MGP5-30OSSG MGP5-34OSSG |
| 6MM | MGP6-2581-23 MGP6-2581-48 |
MGP6-25OSSG MGP6-30OSSG MGP6-34OSSG |
| 8MM | MGP8-2581-23 MGP8-2581-48 |
MULTI-GRIP LOCKBOLT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 3/16 | MG06-745-48 | |
| 1/4 | MG08-745-48 |
PT/MS/9SP MS20600 & MS20601
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/4 | PT08-745B-48 |
CHERRYMAX®, CHERRYMAX® 'AB', BACR15FR/FP, BACR15GF/GK
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/8 | 456MAX-751-23 4 456MAX-751A-61 4 |
456MAX-731-43OS 4 |
| 5/32 | 456MAX-751-23 4 456MAX-751A-61 4 |
456MAX-731-43OS 4 |
| 3/16 | 456MAX-751-23 4 456MAX-751A-61 4 |
456MAX-731-43OS 4 |
MBC® LOCK CREATOR NAS1719X(L), NAS1720X(L) NAS1721X(L)
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/8 | 456MAX-751-23 1,4 456MAX-751A-61 1,4 |
456MAX-731-43OS 1,4 |
| 5/32 | 456MAX-751-23 1,4 456MAX-751A-61 1,4 |
456MAX-731-43OS 1,4 |
| 3/16 | 456MAX-751-23 1,4 456MAX-751A-61 1,4 |
456MAX-731-43OS 1,4 |
NAS1900 S & U SERIES BLIND RIVET WITH DRIVE WASHER
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/4 | 08MAX-745B-23 08MAX-745B-48 |
08MAX-27OSSG 08MAX-37OSSG |
BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT®, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/32 | SB05-745C-23 SB05-745C-48 |
SB05-752A-43OS 5 |
| 3/16 | SB06-745B-23 SB06-745B-48 |
SB06-27OSSG SB06-37OSSG |
| 1/4 | SB08-755-23 SB08-755-48 |
SB08-27OSSG SB08-37OSSG |
BLIND BOLT (SINGLE ACTION) WITH DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT®, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/32 | UBB05-745C-23 UBB05-745C-48 |
UBB05-752B-43OS 5 |
| 3/16 | UBB06-745B-23 UBB06-745B-48 |
UBB06-27OSSG UBB06-37OSSG |
| 1/4 | UBB08-755-23 UBB08-755-48 |
UBB08-27OSSG UBB08-37OSSG |
EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 5/32 | UAB568-713-21 3 UAB568-713-61 3 |
UAB05-752B-43OS 5 |
| 3/16 | UAB568-713-21 3 UAB568-713-61 3 |
UAB06-752B-43OS 5 |
| 1/4 | UAB568-713-21 3 UAB568-713-61 3 |
UAB08-27OSSG UAB08-37OSSG |
BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | *OFFSET |
|---|---|---|
| 1/8 | SMLS04-745C-23 SMLS04-745C-48 |
SMLS04-752B-43OS 5 |
| 5/32 | SMLS05-745C-23 SMLS05-745C-48 |
SMLS05-752B-43OS 5 |
| 3/16 | SMLS06-745B-23 SMLS06-745B-48 |
SMLS06-752B-43OS 5 |
| 1/4 | SMLS08-755-23 SMLS08-755-48 |
SMLS08-27OSSG SMLS08-37OSSG |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB745 WILL INSTALL THE ABOVE FASTENERS | |
| **ALL OFFSET OSSG SERIES NOSES REQUIRE 353206-1 & 745160 STROKE LIMTER, & ALL OFFSET 208 SERIES NOSES REQUIRE 745208 ADAPTER. | |
| 1) ALL MATERIALS EXCEPT TITANIUM & STAINLESS | |
| 2) GENERAL PURPOSE LOCKBOLTS ONLY. NOT RECOMMENDED FOR C120L. | |
| 3) INSTALLS 5/32, 3/16 & 1/4 DIAMETERS. | |
| 4) INSTALLS 1/8, 5/32, & 3/16 DIAMETERS. | |
| 5) ALL OFFSET 713 AND 752 SERIES NOSES REQUIRE 745751 ADAPTER. | |
| 6) GB745 FOR ALL MATERIALS EXCEPT TITANIUM & STAINLESS. NOT RECOMMENDED FOR C120L. | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| ASP®, BOM®, C6L®, LGP®,MLGP®, MGP® AND GP® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. AVBOLT® AND AVDELOK® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. MAXI-BOLT® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS. |