GB743SR Info:
DOWNLOADS
The GB743SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder assembly when held in hand weighs 1.75 lbs. (.79 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29 kg) It has a .900” (22.86 mm) fastener setting stroke.
The GB743SR split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) MAX. of air pressure, with 90 psi. (6.2 bar) of air pressure providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB743SR does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle)
| Total Weight | 7.25 lbs. (3.29 kg). |
| Hand Weight | 1.75 lbs. (.79 kg) |
| Rated Pull Load | 4,000 lbs. (17.79 kN) |
| Stroke | .900" (22.86 mm) |
| Noise Level | Less than 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB743SR
AVEX® (1624 PROTRUDING HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | AV6-743-24 1 | 10248-7 | 30824 | 48808 | AV6 |
AVEX® (1624 COUNTERSUNKHEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6C-743-24 1 | 10248-8 | 30824 | 48808 | 6C |
BULB-TITE® (STRUCTURAL) RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | BT06-743-24 1 | 12282-1 | 30824 | 48808 | BT06 |
| 1/4 | BT08-743-24 1 | 10391 | 30824 | 48808 | BT08 |
| 9/32 | BT09-743-24 1 | 10289 | 30824 | 40901 | BT09 |
KLAMP-TITE® (STRUCTURAL) RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6KT-743-24 1 | 10263 | 30824 | 48808 | 6KT |
| 1/4 | 8KT-743-24 1 | 10262 | 30824 | 48808 | 8KT |
MAGNA-TITE® RIVET
(LOW PROFILE & SHAVEABLE HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6MTL-743-24 1 | 12384 | 30824 | 48808 | 6MTL |
| 1/4 | 8MTL-743-24 1 | 12385 | 30824 | 48808 | 8MTL |
MAGNA-TITE® RIVET
(PROTRUDING & OVAL HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6MTP-743-24 1 | 12382 | 30824 | 48808 | 6MTP |
| 1/4 | 8MTP-743-24 1 | 12383 | 30824 | 48808 | 8MTP |
SFC KOENIG® SEAL PLUG
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 4MM | KSP4-743-24 1 | 10203 | 30824 | 48808 | KSP4 |
| 5MM | KSP5-743-24 1 | 10204 | 30824 | 48808 | KSP5 |
| 6MM | KSP6-743-24 1 | 13469 | 30824 | 48808 | KSP6 |
| 7MM | KSP78-743-24 1 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 8MM | KSP78-743-24 1 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 9MM | KSP910-743-24 1 | 12340-2 | 30824 | 48808-2 | KSP910 |
| 10MM | KSP910-743-24 1 | 12340-2 | 30824 | 48808-2 | KSP910 |
MONOBOLT® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | MB06-734A-20 2 | - | - | - | MB06 |
| 1/4 | MB08-734A-20 2,4 | - | - | - | MB08 |
POP® OPEN END NAIL RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4N-703-18 2 | - | - | - | 4N |
| 5/32 | 5N-743-24 1 | 10203 | 30824 | 48808 | 5N |
| 3/16 | 6N-743-24 1 | 10204 | 30824 | 48808 | 6N |
| 1/4 | 8N-743-24 1 | 10211 | 30824 | 48808 | 8N |
POP® CLOSED END
NAIL RIVET
(ALUMINUM MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4CEA-703-18 2 | - | - | - | 4CEA |
| 5/32 | 5CEA-743-24 1 | 13472 | 30824 | 48808 | 5CEA |
| 3/16 | 6CEA-743-24 1 | 13473 | 30824 | 48808 | 6CEA |
POP® CLOSED END
NAIL RIVET
(STEEL MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4CES-703-18 2 | - | - | - | 4CES |
| 5/32 | 5CES-743-24 1 | 13476 | 30824 | 48808 | 5CES |
| 3/16 | 6CES-743-24 1 | 13477 | 30824 | 48808 | 6CES |
| 1/4 | 8CES-743-24 1 | 13469 | 30824 | 48808 | 8CES |
PLASTIC SPLIT RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3P-703-18 2,3 | - | - | - | 3P |
| 1/8 | 4P-703-18 2,3 | - | - | - | 4P |
| 5/32 | 5P-743-24 1,3 | 10203-2 | 30824 | 48808 | 5P |
| 3/16 | 6P-743-24 1,3 | 10167 | 30824 | 48808 | 6P |
| 1/4 | 8P-743-24 1,3 | 10166 | 30824 | 48808 | 8P |
T RIVET®
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6T-743-24 1 | 10209 | 30824 | 48808 | 6T |
| 1/4 | 8T-743-24 1 | 10286 | 30824 | 48808 | 8T |
TLR® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 1/4 | 8TLR-743-24 1 | 10246 | 30824 | 48808 | 8TLR |
COUNTERSUNK HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK®
& SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | C6-734A-20 2 | - | - | - | C6 |
| 1/4 | C8-734A-20 2,4 | - | - | - | C8 |
PROTRUDING HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK®
& SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | PH6-734A-20 2,4 | - | - | - | PH6 |
| 1/4 | PH8-734A-20 2,4 | - | - | - | PH8 |
FOOTNOTES
| 1) YOU CAN CHANGE THE 743-24 NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP SHOWN AND USING APPROPRIATE FOLLOWER SHOWN. | |
| 2) NOSE ASSEMBLIES WITH A 703-18 AND 734A-20 DESIGNATION, I.E. 5P-703-18, MUST BE ORDERED AS COMPLETE NOSE ASSEMBLY. | |
| 3) MAY REQUIRE MORE THAN (1) PULL. GAGE BILT RECOMMENDS GB734 TOOL. | |
| 4) REQUIRES 100 PSI AIR PRESSURE | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| AVEX®, KLAMP-TITE®, TLR®, HEMLOK® AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. T RIVET® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS. BULB-TITE® IS A REGISTERED TRADEMARK OF GESIPA FASTENERS USA, INC. MAGNA-TITE® AND MAGNA-LOK® ARE REGISTERED TRADEMARKS OF ARCONIC INC. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. SFC KOENIG® IS A REGISTERED TRADEMARK OFSFC KOENIG AG. |