GB743SHVT Info:
DOWNLOADS
The GB743SHVT is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 1.75 lbs. (.80 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29kg). It has a .900” (22.86 mm) fastener setting stroke.
The GB743SHVT split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi (6.2 bar) providing maximum efficiency. At 90 psi (6.2 bar), the GB743SHVT5 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle)
| Total Weight | 7.25 lbs. (3.29 kg). |
| Hand Weight | 1.75 lbs. (.80 kg) |
| Rated Pull Load | 4,000 lbs. (17.79 kN) |
| Stroke | .900" (22.86 mm) |
| Noise Level | Less than 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB743SHVT
AVEX® (1624 PROTRUDING HEAD)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | AV6 | AV6-743-24V 3 | 10248-7 | 703401 | 703589 | 703626 | A-217 |
AVEX® (1624 COUNTERSUNKHEAD)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | 6C | 6C-743-24V 3 | 10248-8 | 703401 | 703589 | 703626 | A-217 |
BULB-TITE® (STRUCTURAL) RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 1/4 | BT08 | BT08-743-24V 3 | 10391 | 703401 | 703632 | A-1559 | A-500 |
KLAMP-TITE® (STRUCTURAL) RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | 6KT | 6KT-743-24V 3 | 10263 | 703401 | 703589 | 703626 | A-217 |
| 1/4 | 8KT | 8KT-743-24V 3 | 10262 | 703401 | 703632 | A-1559 | A-500 |
MACHINE SCREW RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 5MM | MS5M | MS5M-743-24V 3 | 10332 | 703401 | 703589 | 703626 | A-217 |
MBC® NAS1719, NAS1720, NAS1721
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 1/8 | MBC04 | MBC04-703-18V | 10251 | 703421 | 703595 | 703626 | A-217 |
| 5/32 | MBC05 | MBC05-703-18V | 10252 | 703415 | 703589 | 703626 | A-217 |
| 3/16 | MBC06 | MBC06-703-18V | 10253 | 703415 | 703589 | 703626 | A-217 |
SFC KOENIG® SEAL PLUG
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 4MM | KSP4 | KSP4-743-24V 3 | 10203 | 703401 | 703596 | 703626 | A-217 |
| 5MM | KSP5 | KSP5-743-24V 3 | 10204 | 703401 | 703596 | 703626 | A-217 |
| 6MM | KSP6 | KSP6-743-24V 3 | 13469 | 703401 | 703632 | A-1559 | A-500 |
| 7MM | KSP78 | KSP78-743-24V 3 | 12340-1 | 703401-2 | 703632 | A-1559 | A-500 |
| 8MM | KSP78 | KSP78-743-24V 3 | 12340-1 | 703401-2 | 703632 | A-1559 | A-500 |
MONOBOLT® RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | MB06 | MB06-734A-20V 1,4 | 10210 | 703444 | 703589 | 703626 | A-217 |
| 1/4 2 | MB08 | MB08-734A-20V 1,4 | 10213 | 703444 | 703632 | A-1559 | A-500 |
OPEN END RIVET NON-STRUCTURAL AVEX®, MAGNA-LOK®, MAGNA-BULB®, HEMLOK®,KLAMP-TITE®, BULB-TITE® & POP® ULTRA-GRIP® COMMERCIAL RIVETS
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/32 | 3N | 3N-703-18V 4 | 10201 | 703421 | 703595 | 703626 | A-217 |
| 1/8 | 4N | 4N-703-18V 4 | 10202 | 703421 | 703595 | 703626 | A-217 |
| 5/32 | 5N | 5N-703-18V 4 | 10203 | 703415 | 703596 | 703626 | A-217 |
| 3/16 | 6N | 6N-743-24V 3 | 10204 | 703401 | 703589 | 703626 | A-217 |
| 1/4 | 8N | 8N-743-24V 3 | 10211 | 703401 | 703632 | A-1559 | A-500 |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/32 | 3N | 3N-703-18V 4 | 13470 | 703421 | 703595 | 703626 | A-217 |
| 1/8 | 4CEA | 4CEA-703-18V 4 | 13471 | 703421 | 703595 | 703626 | A-217 |
| 5/32 | 5CEA | 5CEA-703-18V 4 | 13472 | 703415 | 703596 | 703626 | A-217 |
| 3/16 | 6CEA | 6CEA-743-24V 3 | 13473 | 703401 | 703589 | 703626 | A-217 |
POP® CLOSED END NAIL RIVET (STEEL MANDREL)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/32 | 3N | 3N-703-18V 4 | 13474 | 703421 | 703595 | 703626 | A-217 |
| 1/8 | 4CES | 4CES-703-18V 4 | 13475 | 703421 | 703595 | 703626 | A-217 |
| 5/32 | 5CES | 5CES-703-18V 4 | 13476 | 703415 | 703596 | 703626 | A-217 |
| 3/16 | 6CES | 6CES-743-24V 3 | 13477 | 703401 | 703589 | 703626 | A-217 |
| 1/4 | 8CES | 8CES-743-24V 3 | 13469 | 703401 | 703632 | A-1559 | A-500 |
PLASTIC SPLIT RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/32 | 3P | 3P-703-18V | 10247-1 | 703421 | 703595 | 703626 | A-217 |
| 1/8 | 4P | 4P-703-18V | 10202-4 | 703421 | 703595 | 703626 | A-217 |
| 5/32 | 5P | 5P-703-18V 3 | 10203-2 | 703415 | 703596 | 703626 | A-217 |
| 3/16 | 6P | 6P-743-24V 3 | 10167 | 703401 | 703589 | 703626 | A-217 |
| 1/4 | 8P | 8P-743-24V 3 | 10166 | 703401 | 703632 | A-1559 | A-500 |
T RIVET®
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | 6T | 6T-743-24V 3 | 10209 | 703401 | 703589 | 703626 | A-217 |
| 1/4 | 8T | 8T-743-24V 3 | 10286 | 703401 | 703632 | A-1559 | A-500 |
TLR® RIVET
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 1/4 | 8TLR | 8TLR-743-24V 3 | 10246 | 703401 | 703632 | A-1559 | A-500 |
COUNTERSUNK HEAD SERRATED STEM STRUCTURAL RIVET (SEE FOOTNOTE 1)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | C6 | C6-734A-20V 1,4 | 10425 | 703444 | 703589 | 703626 | A-217 |
| 1/4 2 | C8 | C8-734A-20V 1,4 | 10211 | 703444 | 703632 | A-1559 | A-500 |
PROTRUDING HEAD SERRATED STEM STRUCTURAL RIVET (SEE FOOTNOTE 1)
| ITEM # | |||||||
| DIAMETER | RIVET SPECIFIC DESIGNATION |
NOSE ASSEMBLY |
(1) NOSE TIP |
(2) FOLLOWER |
(3) EVACUATION TUBE |
(4) FITTING-REGULATOR |
(5) FITTING-TUBE |
|---|---|---|---|---|---|---|---|
| 3/16 | PH6 | PH6-734A-20V 1,4 | 10248 | 703444 | 703589 | 703626 | A-217 |
| 1/4 2 | PH8 | PH8-734A-20V 1,4 | 10205 | 703444 | 703632 | A-1559 | A-500 |
NOTES
| ALL 'VT' TOOLS ARE SOLD FASTENER SPECIFIC TO ENSURE CONSISTENT PINTAIL EVACUATION. WHEN USING TOOL TO INSTALL FASTENERS OTHER THAN WHAT THE TOOL WAS SPECIFIED FOR.
ADDITIONAL ITEMS MAY BE NECESSARY AND ARE PURCHASED SEPARATELY. DETERMINE THE NOSE ASSEMBLY THAT IS ON THE TOOL AND REFER TO THIS TABLE ABOVE TO DETERMINE WHAT MAY
BE NEEDED. EXAMPLE (A): IF THE NOSE ASSEMBLY ON THE TOOL IS 6N-703-18V, AND YOU WISH TO INSTALL A 1/8” ‘N’ FASTENER. THE NOSE ASSEMBLY STYLE (703-18V) IS THE SAME, YOU NEED ONLY TO PURCHASE 10202 NOSE TIP, 703595 EVACUATION TUBE, A-217 FITTING-TUBE AND 703626 FITTING-REGULATOR. EXAMPLE (B): IF THE NOSE ASSEMBLY ON THE TOOL IS 6N-703-18SRV AND YOU WISH TO INSTALL A 1/4” ‘N’ FASTENER. THE STYLE OF NOSE ASSEMBLY IS NOT THE SAME (703-18V vs 743-24V) YOU WILL NEED TO PURCHASE THE ENTIRE 8N-743-24V NOSE ASSEMBLY, 703632 EVACUATION TUBE, A-500 FITTING-TUBE AND A-1559 FITTING-REGULATOR. A-521 FITTING IS NOT RE-USABLE. NEW FITTING MUST BE ORDERED FOR NEW APPLICATIONS. |
FOOTNOTES
| 1) NOSE ASSEMBLIES PH6-734A-20V AND PH8-734A-20V, ARE FOR SERRATED STEM RIVETS ONLY. IF YOU ARE PULlING BOTH SMOOTH AND SERRATED STEM RIVETS YOU MUST ORDER: (3/16") MGL06-743-24V OR (1/4") MGL08-743-24V | |
| 2) REQUIRES 100 PSI AIR PRESSURE | |
| 3) YOU CAN CHANGE THE 743-24V NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP, FOLLOWER, EVACUATION TUBE & FITTINGS SHOWN ABOVE. | |
| 4) NOSE ASSEMBLIES WITH A 703-18V AND 734A-20V DESIGNATION, I.E. 5N-703-18V, MUST BE ORDERED AS A COMPLETE NOSE ASSEMBLY. | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| AVEX®, KLAMP-TITE®,TLR®, HEMLOK®, AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. BULB-TITE® IS A REGISTERED TRADEMARK OF GESIPA FASTENERS USA, INC. MAGNA-LOK® AND MAGNA-BULB® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. ULTRA-GRIP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. T RIVET® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS. SFC KOENIG® IS A REGISTERED TRADEMARK OF SFC KOENIG AG. |