GB743SH Info:
DOWNLOADS
The GB743SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.25 lbs. (1.02 kg). The entire split handle installation tool weighs 7.25 lbs. (3.29kg). It has a .900” (22.86 mm) fastener setting stroke.
The GB743SH split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB743SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
| Total Weight | 7.25 lbs. (3.29 kg). |
| Hand Weight | 2.25 lbs. (1.02 kg) |
| Rated Pull Load | 4,200 lbs. (18.68 kN) |
| Stroke | .900" (22.86 mm) |
| Noise Level | Less than 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB743SH
AVEX® (1624 PROTRUDING HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | AV6-743-24 1 | 10248-7 | 30824 | 48808 | AV6 |
AVEX® (1624 COUNTERSUNKHEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6C-743-24 1 | 10248-8 | 30824 | 48808 | 6C |
BULB-TITE® (STRUCTURAL) RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | BT06-743-24 1 | 12282-1 | 30824 | 48808 | BT06 |
| 1/4 | BT08-743-24 1 | 10391 | 30824 | 48808 | BT08 |
| 9/32 | BT09-743-24 1 | 10289 | 30824 | 40901 | BT09 |
KLAMP-TITE® (STRUCTURAL) RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6KT-743-24 1 | 10263 | 30824 | 48808 | 6KT |
| 1/4 | 8KT-743-24 1 | 10262 | 30824 | 48808 | 8KT |
MAGNA-TITE® RIVET
(LOW PROFILE & SHAVEABLE HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6MTL-743-24 1 | 12384 | 30824 | 48808 | 6MTL |
| 1/4 | 8MTL-743-24 1 | 12385 | 30824 | 48808 | 8MTL |
MAGNA-TITE® RIVET
(PROTRUDING & OVAL HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6MTP-743-24 1 | 12382 | 30824 | 48808 | 6MTP |
| 1/4 | 8MTP-743-24 1 | 12383 | 30824 | 48808 | 8MTP |
SFC KOENIG® SEAL PLUG
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 4MM | KSP4-743-24 1 | 10203 | 30824 | 48808 | KSP4 |
| 5MM | KSP5-743-24 1 | 10204 | 30824 | 48808 | KSP5 |
| 6MM | KSP6-743-24 1 | 13469 | 30824 | 48808 | KSP6 |
| 7MM | KSP78-743-24 1 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 8MM | KSP78-743-24 1 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 9MM | KSP910-743-24 1 | 12340-2 | 30824 | 48808-2 | KSP910 |
| 10MM | KSP910-743-24 1 | 12340-2 | 30824 | 48808-2 | KSP910 |
MONOBOLT® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | MB06-734A-20 2 | - | - | - | MB06 |
| 1/4 | MB08-734A-20 2,4 | - | - | - | MB08 |
POP® OPEN END NAIL RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4N-703-18 2 | - | - | - | 4N |
| 5/32 | 5N-743-24 1 | 10203 | 30824 | 48808 | 5N |
| 3/16 | 6N-743-24 1 | 10204 | 30824 | 48808 | 6N |
| 1/4 | 8N-743-24 1 | 10211 | 30824 | 48808 | 8N |
POP® CLOSED END
NAIL RIVET
(ALUMINUM MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4CEA-703-18 2 | - | - | - | 4CEA |
| 5/32 | 5CEA-743-24 1 | 13472 | 30824 | 48808 | 5CEA |
| 3/16 | 6CEA-743-24 1 | 13473 | 30824 | 48808 | 6CEA |
POP® CLOSED END
NAIL RIVET
(STEEL MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 2 | - | - | - | 3N |
| 1/8 | 4CES-703-18 2 | - | - | - | 4CES |
| 5/32 | 5CES-743-24 1 | 13476 | 30824 | 48808 | 5CES |
| 3/16 | 6CES-743-24 1 | 13477 | 30824 | 48808 | 6CES |
| 1/4 | 8CES-743-24 1 | 13469 | 30824 | 48808 | 8CES |
PLASTIC SPLIT RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3P-703-18 2,3 | - | - | - | 3P |
| 1/8 | 4P-703-18 2,3 | - | - | - | 4P |
| 5/32 | 5P-743-24 1,3 | 10203-2 | 30824 | 48808 | 5P |
| 3/16 | 6P-743-24 1,3 | 10167 | 30824 | 48808 | 6P |
| 1/4 | 8P-743-24 1,3 | 10166 | 30824 | 48808 | 8P |
T RIVET®
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6T-743-24 1 | 10209 | 30824 | 48808 | 6T |
| 1/4 | 8T-743-24 1 | 10286 | 30824 | 48808 | 8T |
TLR® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 1/4 | 8TLR-743-24 1 | 10246 | 30824 | 48808 | 8TLR |
COUNTERSUNK HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK®
& SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | C6-734A-20 2 | - | - | - | C6 |
| 1/4 | C8-734A-20 2,4 | - | - | - | C8 |
PROTRUDING HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK®
& SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | PH6-734A-20 2,4 | - | - | - | PH6 |
| 1/4 | PH8-734A-20 2,4 | - | - | - | PH8 |
FOOTNOTES
| 1) YOU CAN CHANGE THE 743-24 NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP SHOWN AND USING APPROPRIATE FOLLOWER SHOWN. | |
| 2) NOSE ASSEMBLIES WITH A 703-18 AND 734A-20 DESIGNATION, I.E. 5P-703-18, MUST BE ORDERED AS COMPLETE NOSE ASSEMBLY. | |
| 3) MAY REQUIRE MORE THAN (1) PULL. GAGE BILT RECOMMENDS GB734 TOOL. | |
| 4) REQUIRES 100 PSI AIR PRESSURE | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| AVEX®, KLAMP-TITE®, TLR®, HEMLOK® AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. T RIVET® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS. BULB-TITE® IS A REGISTERED TRADEMARK OF GESIPA FASTENERS USA, INC. MAGNA-TITE® AND MAGNA-LOK® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. SFC KOENIG® IS A REGISTERED TRADEMARK OF SFC KOENIG AG |