GB734SHV

AVEX® (1624 PROTRUDING HEAD)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	AV6-743-24V 1	10248-7	30824	703401	AV6

AVEX® (1624 COUNTERSUNKHEAD)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	6C-743-24V1	10248-8	30824	703401	6C

BULB-TITE® (STRUCTURAL) RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	BT06-743-24V 1	12282-1	30824	703401	BT06
1/4	BT08-743-24V 1	10391	30824	703401	BT08
9/32	BT09-743-24V 1	10289	30824	703401	BT09

KLAMP-TITE® (STRUCTURAL) RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	6KT-743-24V 1	10263	30824	703401	6KT
1/4	8KT-743-24V 1	10262	30824	703401	8KT

MAGNA-TITE® RIVET(LOW PROFILE & SHAVEABLE HEAD)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	6MTL-743-24V 1	12384	30824	703401	6MTL
1/4	8MTL-743-24V 1	12385	30824	703401	8MTL

MAGNA-TITE® RIVET(PROTRUDING & OVAL HEAD)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	6MTP-743-24V 1	12382	30824	703401	6MTP
1/4	8MTP-743-24V 1	12383	30824	703401	8MTP

SFC KOENIG® SEAL PLUG

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
4MM	KSP4-743-24 1	10203	30824	703401	KSP4
5MM	KSP5-743-24V 1	10204	30824	703401	KSP5
6MM	KSP6-743-24V 1	13469	30824	703401	KSP6
7MM	KSP78-743-24V 1	12340-1	30824	703401-2	KSP78
8MM	KSP78-743-24V 1	12340-1	30824	703401-2	KSP78

MONOBOLT® RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	MB06-734A-20V 2	-	-	-	MB06
1/4	MB08-734A-20V 2,4	-	-	-	MB08

POP® OPEN END NAIL RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/32	3N-703-18V 2	-	-	-	3N
1/8	4N-703-18V 2	-	-	-	4N
5/32	5N-703-18V 2	-	-	-	5N
3/16	6N-743-24V 1	10204	30824	703401	6N
1/4	8N-743-24V 1	10211	30824	703401	8N

POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/32	3N-703-18V 2	-	-	-	3N
1/8	4CEA-703-18V 2	-	-	-	4CEA
5/32	5CEA-743-24V 1	13472	30617	703415	5CEA
3/16	6CEA-743-24V 1	13473	30824	703401	6CEA

POP® CLOSED END NAIL RIVET (STEEL MANDREL)

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/32	3N-703-18V 2	-	-	-	3N
1/8	4CES-703-18V 2	-	-	-	4CES
5/32	5CES-743-24V 1	13476	30824	703415	5CES
3/16	6CES-743-24V 1	13477	30824	703401	6CES
1/4	8CES-743-24V 1	13469	30824	703401	8CES

PLASTIC SPLIT RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/32	3P-703-18V 2,3	-	-	-	3P
1/8	4P-703-18V 2,3	-	-	-	4P
5/32	5P-743-24V 1,3	10203-2	30824	703401	5P
3/16	6P-743-24V 1,3	10167	30824	703401	6P
1/4	8P-743-24V 1,3	10166	30824	703401	8P

T RIVET®

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	6T-743-24V 1	10209	30824	703401	6T
1/4	8T-743-24V 1	10286	30824	703401	8T

TLR® RIVET

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
1/4	8TLR-743-24V 1	10246	30824	703401	8TLR

COUNTERSUNK HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK® & SERRATED STEM STRUCTURAL RIVETS

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	C6-734A-20V 2	-	-	-	C6
1/4	C8-734A-20V 2,4	-	-	-	C8

PROTRUDING HEAD MAGNA-LOK®, MAGNA-BULB® & HEMLOK® & SERRATED STEM STRUCTURAL RIVETS

DIA.	NOSE ASSEMBLY	NOSE TIP	JAW	FOLLOWER	DESIGNATION
3/16	PH6-734A-20V 2,4	-	-	-	PH6
1/4	PH8-734A-20V 2,4	-	-	-	PH8

FOOTNOTES

1) YOU CAN CHANGE THE 743-24V NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP SHOWN AND USING APPROPRIATE FOLLOWER SHOWN.

2) NOSE ASSEMBLIES WITH A 703-18V AND 734A-20V DESIGNATION, I.E. 5P-703-18V, MUST BE ORDERED AS COMPLETE NOSE ASSEMBLY.

3) MAY REQUIRE MORE THAN (1) PULL. GAGE BILT RECOMMENDS GB734 TOOL.

4) REQUIRES 100 PSI AIR PRESSURE

NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES

CREDITS

AVEX®, KLAMP-TITE®, TLR®, HEMLOK® AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. T RIVET® IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS. BULB-TITE® IS A REGISTERED TRADEMARK OF GESIPA FASTENERS USA, INC. MAGNA-TITE® AND MAGNA-LOK® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. SFC KOENIG® IS A REGISTERED TRADEMARK OF SFC KOENIG AG.