GB731SR

Split Handle Riveter
Pneudraulic Split System Tool GB731SH-5

GB731SR Info:

SPECIFICATIONS
  • Hand Held Weight - 2.25 lbs. (1.02 kg)
  • Entire Tool Weight - 10.5 lbs. (4.76 kg)
  • Air pressure req'd - 90-100 p.s.i. (6.2-6.9 bar)
  • Air consumption - .16 SCF/cycle (4.53 L/cycle)
  • Hydraulic oil - Automatic Transmission Oil, Dexron® III, or equivalent
  • Setting stroke - .600" (15.24 MM)
  • Noise level - Less than 81.5 dB(A)
  • Rated pull load - 4,800 lbs. (21.35 kN)
  • Vibration - Tested - No Hazards Found
  • Additional custom hose lengths are available
DOWNLOADS

NOSE ASSEMBLY CHART - GB731SR

Nose Assembly Selection Chart - GB731SR

Click Images For Enlarged View

"A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
3/32 3A-352B-25 3A-751C-54RA 4
1/8 4A-752C-20
4A-752C-45		 4A-751C-54RA 4 4A-752B-43OS
5/32 5A-752C-20
5A-752C-45		 5A-751C-54RA 4 5A-752B-43OS
3/16 6A-752B-20
6A-752B-45 		6A-751C-54RA 4 6A-752B-43OS
1/4 SMLS08-713-20
SMLS08-713-45 		SMLS08-713B-58RA SMLS08-752B-43OS

ASP® ASP 2, ASP PF, ASP 2 F, ASP 2 LC, ASP 4 FF, ASP FF, ASP F, ASP-LC and MAF

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
13/64 ASP06-752C-20
ASP06-752C-45 		ASP06-751B-54RA 4 ASP06-752B-43OS
17/64 ASP08-752B-20
ASP08-752B-45 		ASP08-751B-54RA 4 ASP08-752B-43OS

LGP® LOCKBOLT LGPL2SC-V BACB30VM LGPL18SC-V BACB30XT LGPL4SC-V ABS0548 LGPL2SP-V BACB30VN LGPL4SP-V ASNA2392 LGPL8SC-V BACB30WD LGPL9SC-V BACB30WB LGPL9SP-V BACB30VY BACB31N BACB31P

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
5/32 LGP05-2480-10
LGP05-2480-20
LGP05-2480-45		 LGP05-25OSSG
LGP05-30OSSG
LGP05-34OSSG
3/16 LGP06-2480-10
LGP06-2480-20
LGP06-2480-45 		LGP06-25OSSG
LGP06-30OSSG
LGP06-34OSSG
7/32 LGP07-731-10
LGP07-731-20
LGP07-731-45		 LGP07-25OSSG
LGP07-34OSSG
LGP07-30OSSG
1/4 LGP08-2480-10
LGP08-2480-20
LGP08-2480-45
 LGP08-25OSSG
LGP08-30OSSG
LGP08-34OSSG

MLGP® (MILLIMETER) LOCKBOLT

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
4MM MLGP4-730B-10
MLGP4-2480-20
MLGP4-2480-45		 MLGP4-25OSSG
MLGP4-30OSSG
MLGP4-34OSSG
5MM MLGP5-730B-10
MLGP5-2480-20
MLGP5-2480-45		 MLGP5-25OSSG
MLGP5-30OSSG
MLGP5-34OSSG
6MM MLGP6-730B-10
MLGP6-2480-20
MLGP6-2480-45		 MLGP6-25OSSG
MLGP6-30OSSG
MLGP6-34OSSG

NAS and GP® SHEAR/TENSION LOCKBOLTS BACB30TY BACB30UA BACB30TZ BACB30UB BACB30DY BACB30GX BACB30DX BACB30GP BACB30GO BACB30GY BACB30GW

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
5/32 NASS05-2480-10
NAST05-2480-10
NASS05-2480-20
NAST05-2480-20
NASS05-2480-45
NAST05-2480-45		 NASS05-25OSSG
NAST05-25OSSG
NASS05-30OSSG
NAST05-30OSSG
NASS05-34OSSG
NAST05-34OSSG
3/16 NAS06-2480-10
NAS06-2480-20
NAS06-2480-45		 NAS06-25OSSG
NAS06-30OSSG
NAS06-34OSSG

MGP® (MILLIMETER) LOCKBOLT

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
4MM MGP4-730B-10
MGP4-2480-20
MGP4-2480-45		 MGP4-25OSSG
MGP4-30OSSG
MGP4-34OSSG
5MM MGP5-730B-10
MGP5-2480-20
MGP5-2480-45		 MGP5-25OSSG
MGP5-30OSSG
MGP5-34OSSG

CHERRYMAX®, CHERRYMAX® 'AB', (FOR 1/4" ALUMMINUM CHERRYMAX® 'AB' USE SMLS08) MBC® LOCK CREATOR BACR15FR/FP, BACR15GF/GK

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
1/8 456MAX-751-23 2
456MAX-751A-61 2		 456MAX-751D-54RA 2,4 456MAX-731-43OS 2
5/32 456MAX-751-23 2
456MAX-751A-61 2		 456MAX-751D-54RA 2,4 456MAX-731-43OS 2
3/16 456MAX-751-23 2
456MAX-751A-61 2		 456MAX-751D-54RA 2,4 456MAX-731-43OS 2
1/4 08MAX-752B-20
08MAX-752B-45		 08MAX-713A-58RA 08MAX-27OSSG
08MAX-37OSSG

MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT®, BACB30YY, YU, & YT, CR7000 SERIES BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
1/8 SMLS04-752C-20
SMLS04-752C-45
5/32 SB05-752C-20
SB05-752C-45
SB05-752C-80		 SB05-751C-54RA 4 SB05-752A-43OS
3/16 SB06-752B-20
SB06-752B-45
SB06-752B-80		 SB06-751B-54RA 4 SB06-27OSSG
SB06-37OSSG
1/4 SB08-713-20 5
SB08-713-45 5		 SB08-713A-58RA 5 SB08-27OSSG 5
SB08-37OSSG 5

EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU MAXIBOLT® PLUS

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
5/32 UAB568-713-21 3
UAB568-713-61 3		 UAB05-752B-43OS
3/16 UAB06-751B-54RA 4 UAB06-752B-43OS
1/4 UAB08-27OSSG
UAB08-37OSSG

NAS1900 S & U SERIES UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
1/8 SMLS04-752C-20
SMLS04-752C-45		 SMLS04-751C-54RA 4 SMLS04-752B-43OS
5/32 SMLS05-752C-20
SMLS05-752C-45		 SMLS05-751C-54RA 4 SMLS05-752B-43OS
3/16 SMLS06-752B-20
SMLS06-752B-45		 SMLS06-751C-54RA 4 SMLS06-752B-43OS
1/4 SMLS08-713-20
SMLS08-713-45		 SMLS08-713B-58RA SMLS08-752B-43OS

NAS1900 S & U SERIES UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER

DIA. STRAIGHT *RIGHT ANGLE 1 **OFFSET
1/8
5/32 456UBR-751A-21 2
456UBR-751A-61 2 		456UBR-751D-54RA 2,4 456MAX-731-43OS 2
3/16
1/4 UBR08-713-20
UBR08-713-45		 UBR08-713B-58RA UBR08-27OSSG
UBR08-37OSSG

FOOTNOTES

GAGE BILT CERTIFIES THE GB731 WILL INSTALL THE ABOVE FASTENERS
**ALL OFFSET OSSG SERIES NOSES REQUIRE 731206 ADAPTER (NO STROKE LIMITER REQUIRED). OPTIONAL 751206-1 ADAPTER & 731158 STROKE LIMITER.
1) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN ONE PULL.
2) INSTALLS 1/8, 5/32 & 3/16 DIAMETERS
3) INSTALLS 5/32, 3/16 & 1/4 DIAMETERS
4) RIGHT ANGLE NOSE REQUIRES 731154 STROKE LIMITER.
5) 105 P.S.I. REQUIRED FOR MS90353 & MS90354
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES

CREDITS

ASP®, LGP®, MLGP®, MGP®, UNIMATIC® AND GP® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. CHERRYMAX®, MAXI-BOLT® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS.