GB714SH Info:
DOWNLOADS
The GB714SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets and lockbolt fasteners. This tool’s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand weighs 2.50 lbs. (1.1 kg). The entire split handle installation tool weighs 7.50 lbs. (3.4 kg). It has a .590” (15 mm) fastener setting stroke.
The GB714SH split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) Max. of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) air pressure, the GB714SH does not exceed 81.5 dB(A) and consumes 6 cfm at 20 cycles per minute.
| Hand Weight | 2.50 lbs. (1.13 kg) |
| Entire Weight | 7.50 lbs. (3.4 kg) |
| Rated Pull Load | 6,400 lbs. (28.4 kN) |
| Stroke | .590” (15 mm) |
| Noise Level | Less than 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB714SH
Click Images For Enlarged View
C6L® LOCKBOLTS
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | LB06-722-20 LB06-722-60 |
||
| 1/4 | LB08-722-20 LB08-722-60 |
||
MAGNA-GRIP® LOCKBOLTS
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | MG06-722-20 MG06-722-60 |
||
| 1/4 | MG08-722-20 MG08-722-60 |
BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT®, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | SB04-752C-20 SB04-752C-45 |
SB04-751C-54RA
|
SB04-752B-43OS |
| 5/32 | SB05-752C-20 SB05-752C-45 SB05-752C-80 |
SB05-751C-54RA 3 | SB05-752A-43OS |
| 3/16 | SB06-752B-20 SB06-752B-45 SB06-752B-80 |
SB06-751B-54RA 3 | SB06-27OSSG SB06-37OSSG |
| 1/4 | SB08-713-20 SB08-713-45 |
SB08-713A-58RA | SB08-27OSSG SB08-37OSSG |
BLIND BOLT (SINGLE ACTION) WITH DRIVE WASHER MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U CR7000 SERIES, BACB30YY, YU, & YT
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | UBB04-752C-20 UBB04-752C-45 |
UBB04-751C-54RA 3 | UBB04-752B-43OS |
| 5/32 | UBB05-752C-20 UBB05-752C-45 UBB05-752C-80 |
UBB05-751C-54RA 3 | UBB05-752B-43OS |
| 3/16 | UBB06-752B-20 UBB06-752B-45 UBB06-752B-80 |
UBB06-751B-54RA 3 | UBB06-27OSSG UBB06-37OSSG |
| 1/4 | UBB08-713-20 UBB08-713-45 |
UBB08-713A-58RA | UBB08-27OSSG UBB08-37OSSG |
EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | UAB568-713-21 3 UAB568-713-61 3 |
||
| 3/16 | UAB06-751B-54RA 2 | UAB06-752B-43OS | |
| 1/4 | UAB08-27OSSG UAB08-37OSSG |
BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | SMLS04-752C-20 SMLS04-752C-45 |
SMLS04-751C-54RA 3 | SMLS04-752B-43OS |
| 5/32 | SMLS05-752C-20 SMLS05-752C-45 |
SMLS05-751C-54RA 3 | SMLS05-752B-43OS |
| 3/16 | SMLS06-752B-20 SMLS06-752B-45 |
SMLS06-751C-54RA 3 | SMLS06-752B-43OS |
| 1/4 | SMLS08-713-20 | SMLS08-713B-58RA | SMLS08-27OSSG SMLS08-37OSSG |
UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER NAS1900 S & U SERIES
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | |||
| 5/32 | 456UBR-751A-21 1 456UBR-751A-61 1 |
456UBR-751D-54RA 1,2 | 456MAX-731-43OS 1 |
| 3/16 | |||
| 1/4 | UBR08-713-20 UBR08-713-45 |
UBR08-713B-58RA | UBR08-27OSSG UBR08-37OSSG |
"A" CODE NAS1398A & NAS1399A
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/32 | 3A-352B-25 | 3A-751B-54RA 2 | |
| 1/8 | 4A-752C-20 4A-752C-45 |
4A-751C-54RA 2 | 4A-752B-43OS |
| 5/32 | 5A-752C-20 5A-752C-45 |
5A-751C-54RA 2 | 5A-752B-43OS |
| 3/16 | 6A-752B-20 6A-752B-45 |
6A-751C-54RA 2 | 6A-752B-43OS |
| 1/4 | SMLS08-713-20 | SMLS08-713B-58RA | SMLS08-27OSSG SMLS08-37OSSG |
T RIVET®
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | 6T-352-21 6T-352-61 |
||
| 1/4 | 8T-352-21 8T-352-61 |
PROTRUDING HEAD, MULTI-GRIP BLIND RIVETS
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | MGL06-752A-21 MGL06-752A-61 |
MGL06-713B-58RA | |
| 1/4 | MGL08-752A-21 MGL08-752A-61 |
MGL08-713B-58RA |
MONOBOLT®
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/16 | MB06-752A-21 MB06-752A-61 |
||
| 1/4 | MB08-752A-21 MB08-752A-61 |
CONTAINER BOLT(R 12) HLPP, HLPM, HLPE, HLPS HLPSC & HLPSM
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 3/8 | HT12-713-20 |
TLR RIVET®
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/4 | 8TLR-352-21 8TLR-352-61 |
CHERRYMAX®, CHERRYMAX® 'AB', (FOR 1/4" ALUMINUM CHERRYMAX® 'AB' USE SMLS08) BACR15FR/FP, BACR15GF/GK, NAS1900 S & U SERIES BLIND RIVET WITH DRIVE WASHER
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | 456MAX-751-23 1 456MAX-751A-61 1 |
456MAX-751D-54RA 1,3 | 456MAX-731-43OS 1 |
| 5/32 | |||
| 3/16 | |||
| 1/4 | 08MAX-752B-20 08MAX-752B-45 |
08MAX-713A-58RA | 08MAX-27OSSG 08MAX-37OSSG |
ASP® ASP 2, ASP PF, ASP 4 FF, ASP 2 F, ASP 2 LC
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 13/64 | ASP06-752C-20 ASP06-752C-45 |
ASP06-751B-54RA 3 | ASP06-752B-43OS |
| 17/64 | ASP08-752B-20 ASP08-752B-45 |
ASP08-752B-43OS | |
| 21/64 | ASP10-713-20 ASP10-713-45 |
ASP10-27OSSG ASP10-37OSSG |
STANDARD MBC® NAS1719, NAS1720 NAS1721
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | MBC04-752C-20 MBC04-752C-45 |
MBC04-751C-54RA 3 | MBC04-752C-43OS |
| 5/32 | MBC05-752C-20 MBC05-752C-45 |
MBC05-751C-54RA 3 | MBC05-752C-43OS |
| 3/16 | MBC06-752B-20 MBC06-752B-45 |
MBC06-751C-54RA 3 | MBC06-752C-43OS |
MBC® LOCK CREATOR NAS1719X(L), NAS1720X(L) NAS1721X(L)
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 1/8 | 5/32 | 456MAX-751-23 1 456MAX-751A-61 1 |
456MAX-751D-54RA 1,3 | 456MAX-731-43OS 1 | 3/16 |
GROUND STUD, M83454 BACS53B
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 8/32 | GS8-752C-20 GS8-752C-45 |
GS8-751C-54RA 2 | GS8-752B-43OS |
| 10/32 | GS10-752B-20 GS10-752B-45 |
GS10-752A-54RA 2 | GS10-752B-43OS |
MILLIMETER PLUG SEAL
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 4MM | 5N-751-23 5N-352-61 |
45N-751B-54RA 2 | 5N-751A-43OS |
| 5MM | 6N-751-23 6N-352-61 |
6N-751C-54RA 2 | 6N-751A-43OS |
POP® OPEN END NAIL RIVET
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | 5N-751-23 5N-352-61 |
45N-751B-54RA 2 | 5N-751A-43OS |
| 3/16 | 6N-751-23 6N-352-61 |
6N-751C-54RA 2 | 6N-751A-43OS |
| 1/4 | 8CN-713-21 8CN-713-61 |
8N-713A-58RA |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | 5CEA-751-23 5CEA-352-61 |
5CEA-751B-54RA 3 | 5CEA-751-43OS |
| 3/16 | 6CEA-751-23 6CEA-352-61 |
6CEA-751C-54RA 3 | 6CEA-751-43OS |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | STRAIGHT | *RIGHT ANGLE | *OFFSET |
|---|---|---|---|
| 5/32 | 5CES-751-23 5CES-352-61 |
5CES-751B-54RA 2 | 5CES-751-43OS |
| 3/16 | 6CES-751-23 6CES-352-61 |
6CES-751C-54RA 2 | 6CES-751-43OS |
| 1/4 | 8CES-713A-58RA |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB714 WILL INSTALL THE ABOVE FASTENERS | |
| *ALL "OSSG" SERIES NOSES REQUIRE 713206 ADAPTER (NO STROKE LIMITER REQUIRED). OPTIONAL 751206-1 ADAPTER & 714153 STROKE LIMITER. | |
| 1) INSTALLS 1/8", 5/32" AND 3/16" DIAMETERS. | |
| 2) THESE NOSES REQUIRE 714152 STROKE LIMITER. | |
| 3) INSTALLS 5/32", 3/16", AND 1/4" | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| T RIVET®, CHERRYMAX®, MAXI-BOLT®, AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE. MONOBOLT® AND TLR® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. ASP®, MAGNA-GRIP® AND C6L® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. |