GB704SR Info:
DOWNLOADS
The GB704SR is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners. This tool's unique "split" system provide the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 1.5 lbs. (.68 kg). The entire split handle tool weight 6.5 lbs (2.95 kg). It has a .540 (13.72 mm) astener setting stroke.
| Hand Weight | 1.5 lbs. (.68 kg) |
| Rated Pull Load | 3,300 lbs. (14.68 kN) |
| Stroke | .540" (13.72 mm) |
| Noise Level | 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB704SR
Click Images For Enlarged View
NOSE ASSEMBLY SELECTION CHART - GB704SR
| FASTENER | DIAMETER | STRAIGHT
|
RIGHT ANGLE 2 | OFFSET | |||
| CHERRYMAX® CHERRYMAX® 'AB' MBC® LOCK CREATOR BACR15FR/FP BACR15GF/GK |
1/8 5/32 3/16 |
456MAX-701-17 1 ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704-35 1 456MAX-749-35 1,3 ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704-54RA 1 |
456MAX-704-43OS 1 |
||
| NUT PLATE RIVETS MS20600 SERIES CCR244/264/274 MS/9SP/PT BACR15CC/CF/DA/DR |
3/32 1/8 5/32 3/16 |
3C-704A-16 4C-704A-16 5C-704A-16 6C-704A-16 |
3C-704-54RA 4C-704-54RA 5C-704-54RA 6C-704-54RA |
3C-704A-40OS 4C-704A-40OS 5C-704A-40OS 6C-704A-40OS |
|||
| NAS1900 S & U SERIES UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER | 1/8 5/32 3/16 |
SMLS04-704A-16 SMLS05-704A-16 SMLS06-704A-16 |
SMLS04-704-54RA SMLS05-704-54RA SMLS06-704-54RA |
SMLS04-704A-40OS SMLS05-704A-40OS SMLS06-704A-40OS |
|||
| NAS1900 S & U SERIES UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER | 1/8 5/32 3/16 |
UBR04-704A-16 UBR05-704A-16 UBR06-704A-16 |
456UBR-704-54RA 1 |
456MAX-704B-40OS 1 |
|||
| "A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A | 3/32 1/8 5/32 3/16 |
3A-704A-16 4A-704A-16 5A-704A-16 6A-704A-16 |
3A-704-54RA 4A-704-54RA 5A-704-54RA 6A-704-54RA |
3A-704A-40OS 4A-704A-40OS 4A-704A-40OS 6A-704A-40OS |
|||
| GROUND STUD, M83454 & BACS53B | 8/32 10/32 |
GS8-704-16 GS10-704A-19 |
GS8-704A-54RA GS10-704-54RA |
GS8-704-40OS GS10-704A-40OS |
|||
FOOTNOTES
| GAGE BILT CERTIFIES THE GB704 WILL INSTALL THE ABOVE FASTENERS | |
| 1) INSTALLS 1/8", 5/32", AND 3/16" DIAMETERS | |
| 2) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN ONE PULL | |
| 3) FRONT END EJECTING NOSE ASSEMBLY | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| CHERRYMAX® and MBC® are registered trademarks of Cherry Aerospace Fasteners. UNIMATIC® is a registered trademark of HOWMET AEROSPACE |