GB703SH Info:
DOWNLOADS
The GB703SH is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This tools unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held in hand weighs 4.5 lbs. (2.0 kg). The entire split handle installation tool weighs 10 lbs. (4.5 kg). It has a .780” (19.8 mm) fastener setting stroke.
The GB703SH split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB703SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle)
| Total Weight | 10 lbs. (4.5 kg) |
| Hand Weight | 4.5 lbs. (2.0 kg) |
| Rated Pull Load | 2,200 lbs. (9.8 kN) |
| Stroke | .780" (19.8 mm) |
| Noise Level | 81.5 dB(A) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB703SH
AVEX® (1624 PROTRUDING HEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | AV6-703-18 1 | 10141 | 30617 | 40605 | AV6 |
AVEX® (1624 COUNTERSUNKHEAD)
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6C-703-18 1 | 10141-1 | 30617 | 40605 | 6C |
KLAMP-TITE® (STRUCTURAL) RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6KT-703-18 1 | 10263 | 30617 | 40605 | 6KT |
| 1/4 | 8KT-743-24 2 | - | - | - | 8KT |
MACHINE SCREW RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 5MM | MS5M-703-18 1 | 10332 | 30617 | 40605 | 5MM |
NAS1719, NAS1720, NAS1721 MBC®
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 1/8 | MBC04-703-18 1 | 10251 | 30617 | 40307 | MBC04 |
| 5/32 | MBC05-703-18 1 | 10252 | 30617 | 40605 | MBC05 |
| 3/16 | MBC06-703-18 1 | 10253 | 30617 | 40605 | MBC06 |
SFC KOENIG® SEAL PLUG
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 4MM | KSP4-743-24 2 | 10203 | 30824 | 48808 | KSP4 |
| 5MM | KSP5-743-24 2 | 10204 | 30824 | 48808 | KSP5 |
| 6MM | KSP6-743-24 2 | 13469 | 30824 | 48808 | KSP6 |
| 7MM | KSP78-743-24 2 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 8MM | KSP78-743-24 2 | 12340-1 | 30824 | 48808-2 | KSP78 |
| 9MM | KSP910-743-24 2 | 12340-2 | 30824 | 48808-2 | KSP910 |
| 10MM | KSP910-743-24 2 | 12340-2 | 30824 | 48808-2 | KSP910 |
MONOBOLT® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | MB06-734A-20 2,5 | - | - | - | MB06 |
| 1/4 3 | MB08-734A-20 2,5 | - | - | - | MB08 |
NUTPLATE RIVET CCR244/264/274 BACR15DR MS20600
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3NP-703-18 1 | 10231 | 30617 | 40307 | 3NP |
| 1/8 | 5N-703-18 1 | 10203 | 30617 | 40605 | 5N |
POP® OPEN END NAIL RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 1 | 10201 | 30617 | 40307 | 3N |
| 1/8 | 4N-703-18 1 | 10202 | 30617 | 40307 | 4N |
| 5/32 | 5N-703-18 1 | 10203 | 30617 | 40605 | 5N |
| 3/16 | 6N-703-18 1 | 10204 | 30617 | 40605 | 6N |
POP® CLOSED END NAIL RIVET (ALUMINUM MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 1 | 10201 | 30617 | 40307 | 3N |
| 1/8 | 4CEA-703-18 1 | 13471 | 30617 | 40307 | 4CEA |
| 5/32 | 5CEA-703-18 1 | 13472 | 30617 | 40605 | 5CEA |
| 3/16 | 6CEA-703-18 1 | 13473 | 30617 | 40605 | 6CEA |
POP® CLOSED END NAIL RIVET (STEEL MANDREL)
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3N-703-18 1 | 10201 | 30617 | 40307 | 3N |
| 1/8 | 4CES-703-18 1 | 13475 | 30617 | 40307 | 4CES |
| 5/32 | 5CES-703-18 1 | 13476 | 30617 | 40605 | 5CES |
| 3/16 | 6CES-703-18 1 | 13477 | 30617 | 40605 | 6CES |
PLASTIC SPLIT RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/32 | 3P-703-18 1, 6 | 10247-1 | 30617 | 40307 | 3P |
| 1/8 | 4P-703-18 1, 6 | 10202-4 | 30617 | 40307 | 4P |
| 5/32 | 5P-703-18 1, 6 | 10203-2 | 30617 | 40605 | 5P |
| 3/16 | 6P-703-18 1, 6 | 10167 | 30617 | 40605 | 6P |
| 1/4 | 8P-743-24 2, 6 | - | - | - | 8P |
SCREW RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6SR-703-18 1 | 13506 | 30617 | 40605 | 6SR |
T RIVET®
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | 6T-703-18 1 | 10209 | 30617 | 40605 | 6T |
| 1/4 3 | 8T-743-24 2 | - | - | - | 8T |
TLR® RIVET
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 1/4 | 8TLR-743-24 2 | - | - | - | 8TLR |
COUNTERSUNK HEAD MAGNA-LOK® & SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | C6-734A-20 2,5 | - | - | - | C6 |
| 1/4 4 | C8-734A-20 2,5 | - | - | - | C8 |
PROTRUDING HEAD MAGNA-LOK® & SERRATED STEM STRUCTURAL RIVETS
| DIA. | NOSE ASSEMBLY | NOSE TIP 1 | JAW | FOLLOWER | DESIGNATION |
|---|---|---|---|---|---|
| 3/16 | PH6-734A-20 2,5 | - | - | - | PH6 |
| 1/4 4 | PH8-734A-20 2,3,5 | - | - | - | PH8 |
FOOTNOTES
| 1) YOU CAN CHANGE THE 703-18 NOSE ASSEMBLY (INCLUDED WITH TOOL) TO INSTALL OTHER FASTENERS BY PURCHASING NOSE TIP 1 SHOWN AND USING APPROPRIATE FOLLOWER SHOWN. | |
| 2) NOSE ASSEMBLIES WITH A 743-24 AND 734A-20 DESIGNATION, I.E. 8N-743-24, MUST BE ORDERED AS COMPLETE NOSE ASSEMBLY. | |
| 3) ALUMINUM RIVET STEEL MANDREL ONLY (100 PSI REQUIRED FOR ALL 1/4" STEEL RIVETS). | |
| 4) 1/4" ALUMINUM ONLY. | |
| 5) NOSE ASSEMBLIES WITH A 734A DESIGNATION, I.E. PH6-734A-20, ARE FOR SERRATED STEM RIVETS ONLY. IF YOU ARE PULLlING BOTH SMOOTH AND SERRATED STEM RIVETS YOU MUST ORDER THE NOSE ASSEMBLY WITH A 743 DESIGNATION, I.E. MGL06-743-24. | |
| 6) MAY REQUIRE MORE THAN (1) PULL. GAGE BILT RECOMMENDS GB734 TOOL. | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
CREDITS
| AVEX®, KLAMP-TITE®, TLR®, AND MONOBOLT® ARE REGISTERED TRADEMARKS OF AVDEL UK LIMITED. T RIVET® AND MBC® ARE REGISTERED TRADEMARKS OF CHERRY AEROSPACE FASTENERS. POP® IS A REGISTERED TRADEMARK OF EMHART TEKNOLOGIES. MAGNA-LOK® IS A REGISTERED TRADEMARK OF HOWMET AEROSPACE. SFC KOENIG® IS A REGISTERED TRADEMARK OF SFC KOENIG AG. |
|---|