GB2630/GB2630A Info:
APPLICATIONS
- 7/8"
- C50L®
- HP8 HUCK-FIT®
- BOM®
- LD AVDELOK®
- AVBOLT®
- 20mm
- HP10.9 millimeter HUCK-FIT®
DOWNLOADS
FASTENER TOOL CHART - GB2630/GB2630A
The GB2630 and the GB2630A are hydraulic installation tools designed specifically for the efficient installation of 7/8” diameter lockbolts only. It weighs just over 22.4 lbs. (10.2 kg). and can be operated in any position. It has a 1.906” (48.4 mm) fastener stroke and a rated pull load of 55,940 lbs. (248.8kN) @ 7,400 psi. (510.2 bar)
| Weight | 22.4 lbs. (10.2 kg) |
| Rated Pull Load | 55,940 lbs. (248.8kN) @ 7,400 psi. |
| Stroke | 1.906” (48.4 mm) |
| Noise Level | No noise hazards identified. |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB2630/GB2630A
Click Images For Enlarged View
LOCKBOLT HIGH TENSILE PULL TYPE C50L®
| DIA. | NOSE ASSEMBLY |
|---|---|
| 7/8" (22.2mm) | 28-2630-28 |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB2630 WILL INSTALL THE ABOVE FASTENER | |
| See nose assembly information (data sheets) | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE ASSEMBLY EXTENDS FROM THE TOOL. (I.e. -28 = 2.8 inches) |
CREDITS
| C50L® IS A REGISTERED TRADEMARK OF HOWMET AEROSPACE. |