The GB2620PT / GB2620PTA is a hydraulic installation tool designed specifically for the efficient installation of 1/2” diameter lockbolts only.
It weighs 9 lbs. 14 oz. (4.5 kg). It has a 1.437" (36.5mm) fastener setting stroke and a rated pull load of 17,745 lbs. (78.9kN) @ 6,500 psi. (448.2 bar).
The GB2620PT (Electric actuated) installation tool operates on hydraulic pressure developed by the GB947 powerunit or equivalent
set at 7,400 psi. (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure, enabling the tool to pull
all the fasteners listed on the selection chart without adjusting pressures. Powerunit may be set to the pressures only needed to pull
your specific fastener using the pressure gage assembly (942280). The tool comes equipped with 2 feet (.61 m) of hydraulic hoses,
couplings, electric switch and cord.
The GB2620PTA (Air actuated) installation tool operates on hydraulic pressure developed by the GB910 or GB912 powerunit or
equivalent set at 7,400 psi. (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure, enabling the
tool to pull all the fasteners listed on the selection chart without adjusting pressures. Powerunit may be set to the pressures only
needed to pull your specific fastener using the pressure gage assembly (942280). The tool comes equipped with 2 feet (.61 m) of
hydraulic hoses, couplings, air actuator and tube.
| Weight |
9 lbs. 14 oz. (4.5 kg) |
| Rated Pull Load |
17,745 lbs. (78.9kN) @ 6,500 psi |
| Stroke |
1.437" (36.5 mm) |
| Noise Level |
81.5 dB (A) |
| Warranty |
1 year |
