GB206-500 Info:
DOWNLOADS
The GB206-500 and GB206-500(A) are hydraulic installation tools designed specifically for the efficient installation of blind, lockbolt and Magna-Grip® fasteners thru 3/16" diameter. They weigh just over 3 lbs. (1.36 kg) and can be operated in any position. They have a .500” (12.7 mm) fastener setting stroke and a rated pull load of 5,825 lbs. (25.9 kN).
| Weight | 3 lbs. (1.36 kg) |
| Rated Pull Load | 5,825 lbs. (25.9 kN) |
| Stroke | .500” (12.7 mm) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB206-500
Click Images For Enlarged View
NAS and GP®
SHEAR/TENSION
LOCKBOLTS
BACB30TY
BACB30TZ
BACB30DY
BACB30DX
BACB30GO BACB30UA
BACB30UB
BACB30GX
BACB30GP
BACB30GY BACB30GW
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 5/32" | NAST05-25OSSG NASS05-25OSSG |
NAST05-30OSSG NASS05-30OSSG |
NAST05-34OSSG NASS05-34OSS |
| 3/16" | NAS06-25OSSG | NAS06-30OSSG | NAS06-34OSSG |
| 1/4" | NAS08-25OSSG | NAS08-30OSSG | NAS08-34OSSG |
MGP® (MILLIMETER) LOCKBOLT
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 4mm | MGP4-25OSSG | MGP4-30OSSG | MGP4-34OSSG |
| 5mm | MGP5-25OSSG | MGP5-30OSSG | MGP5-34OSSG |
LGP® LGPL2SC-V LGPL18SC-V LGPL4SC-V LGPL2SP-V LGPL4SP-V LGPL8SC-V LGPL9SC-V LGPL9SP-V BACB31N BACB30VM BACB30XT ABS0548 BACB30VN ASNA2392 BACB30WD BACB30WB BACB30VY BACB31P
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 5/32" | LGP05-25OSSG | LGP05-30OSSG | LGP05-34OSSG |
| 3/16" | LGP06-25OSSG | LGP06-30OSSG | LGP06-34OSSG |
| 7/32" | LGP07-25OSSG | LGP07-30OSSG | LGP07-34OSSG |
| 1/4" | LGP08-25OSSG | LGP08-30OSSG | LGP08-34OSSG |
MLGP® (MILLIMETER) LOCKBOLT
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 4mm | MLGP4-25OSSG | MLGP4-30OSSG | MLGP4-34OSSG |
| 5mm | MLGP5-25OSSG | MLGP5-30OSSG | MLGP5-34OSSG |
NAS1900 S & U SERIES UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 1/8" | SMLS04-27OSSG | SMLS04-37OSSG | |
| 5/32" | SMLS05-27OSSG | SMLS05-37OSSG | |
| 3/16" | SMLS06-27OSSG | SMLS06-37OSSG | |
| 1/4" | SMLS08-27OSSG | SMLS08-37OSSG |
MS90353S & U / MS90354S & U
MS21140S & U / MS21141S & U
MAXIBOLT®, BACB30YY, YU, & YT
CR7000 SERIES
BLIND BOLT (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 5/32" | SB05-27OSSG | SB05-37OSSG | |
| 3/16" | SB06-27OSSG | SB06-37OSSG | |
| 1/4" | SB08-27OSSG | SB08-37OSSG |
EN6122 & UAB130-EU
EN6127 & UAB6127-EU
EN6128 & UAB100-EU
EN6129 & UABP-EU
MAXIBOLT® PLUS
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 3/16" | UAB06-27OSSG | UAB06-37OSSG | |
| 1/4" | UAB08-27OSSG | UAB08-37OSSG |
"A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 1/8" | 4A-27OSSG | 4A-37OSSG | |
| 5/32" | 5A-27OSSG | 5A-37OSSG | |
| 3/16" | 6A-27OSSG | 6A-37OSSG | |
| 1/4" | SMLS08-27OSSG | SMLS08-37OSSG |
ASP® ASP 2, ASP PF, ASP 2 F, ASP 2 LC, ASP 4 FF, ASP FF, ASP F, ASP-LC and MAF
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 13/64" | ASP06-27OSSG | ASP06-37OSSG | |
| 17/64" | ASP08-27OSSG | ASP08-37OSSG | |
| 21/64" | ASP10-27OSSG | ASP10-37OSSG |
STANDARD MBC® NAS1719, NAS1720 NAS1721
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 1/8" | MBC04-27OSSG 3 | MBC04-37OSSG 3 | |
| 5/32" | MBC05-27OSSG 3 | MBC05-37OSSG 3 | |
| 3/16" | MBC06-27OSSG 3 | MBC06-37OSSG 3 |
GROUND STUD, M83454 & BACS53B 2
| DIA. | STANDARD | STRADDLE NOSE 1 | LONG |
|---|---|---|---|
| 8/32" | GS8-32OSSG | GS8-42OSSG | |
| 10/32" | GS10-32OSSG | GS10-42OSSG |
FOOTNOTES
| GAGE BILT CERTIFIES THE GB206-500 WILL INSTALL THE ABOVE FASTENERS | |
| 1) -30 STRADDLE NOSES ARE DEISIGNED TO REACH OVER THE COLLAR | |
| 2) BACS53B -10 ONLY | |
| 3) MAY REQUIRE MORE THAN ONE PULL | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE ASSEMBLY EXTENDS FROM THE TOOL. (I.e. -25 = 2.5 inches) | |
| NOTE: XX-25OSSG, XX-30OSSG & XX-34OSSG Offset Nose Assemblies are supplied with a one-piece Super Grip Jaw Assembly for dry applications. For wet applications where sealant is used, XX-25OS, XX-30OS & XX-34OS Offset Nose Assemblies may be ordered. The “OS” designates that the Offset Nose Assembly will come with loose Jaws, Follower, Spring and Locator for easier cleaning. Please note this only applies to cartridge style Offset Noses listed above. |
CREDITS
| MGP®, GP®, LGP®, MLGP®, AND ASP® ARE REGISTERED TRADEMARKS OF HOWMET AEROSPACE. MAXI-BOLT®, IS A REGISTERED TRADEMARK OF CHERRY AEROSPACE FASTENERS. |