GB107A-704 Info:
DOWNLOADS
The GB107A-704 is a battery operated 20V installation tool designed specifically for the efficient installation of 3/32” (2.4 mm) thru 3/16” (5.0 mm) blind rivets. It weighs 3.5 lbs. (1.6 kg) and can be operated in any position. It has a .984” (25 mm) fastener setting stroke and a rated pull load of 2,248 lbs. (10 kN).
| Weight (Incl. battery) | 3.5 lbs. (1.6 kg) |
| Rated Pull Load | 2,248 lbs. (10 kN) |
| Stroke | .984” (25 mm) |
| Battery Weight | .32 lbs. (0.145 kg) |
| Height | 11.250 (285.5 mm) |
| Width | 10.500 (266.5 mm) |
| Warranty | 1 year |
Nose Assembly Selection Chart - GB107A-704
Click Images For Enlarged View
NOSE ASSEMBLY SELECTION CHART - GB107A-704
| FASTENER | DIAMETER | STRAIGHT
|
RIGHT ANGLE (1) | OFFSET | |||
| CHERRYMAX® CHERRYMAX® 'AB' MBC® LOCK CREATOR BACR15FR/FP BACR15GF/GK |
1/8 5/32 3/16 |
456MAX-701-17 ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704-35 456MAX-749-35 2 ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704-54RA ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704B-40OS ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
||
| NUT PLATE RIVETS MS20600 SERIES CCR244/264/274 MS/9SP/PT BACR15CC/CF/DA/DR |
3/32 1/8 5/32 3/16 |
3C-101704-16 4C-704A-16 5C-704A-16 6C-704A-16 |
3C-704-54RA 4C-704-54RA 5C-704-54RA 6C-704-54RA |
3C-704A-40OS 4C-704A-40OS 5C-704A-40OS 6C-704A-40OS |
|||
| UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER NAS1900 S & U SERIES |
1/8 5/32 3/16 |
SMLS04-704A-16 SMLS05-704A-16 SMLS06-704A-16 |
SMLS04-704-54RA SMLS05-704-54RA SMLS06-704-54RA |
SMLS04-704A-40OS SMLS05-704A-40OS SMLS06-704A-40OS |
|||
| UNIMATIC® BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER NAS1900 S & U SERIES |
1/8 5/32 3/16 |
UBR04-704A-16 UBR05-704A-16 UBR06-704A-16 |
456UBR-704-54RA ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
456MAX-704B-40OS ABOVE NOSE ASSY. INSTALLS 1/8", 5/32" & 3/16" DIAMETERS |
|||
| 'A' CODE NAS1398A NAS1399A |
1/8 5/32 3/16 |
3A-101704-16 4A-704A-16 5A-704A-16 6A-704A-16 |
3A-704-54RA 4A-704-54RA 5A-704-54RA 6A-704-54RA |
3A-704A-40OS 4A-704A-40OS 4A-704A-40OS 6A-704A-40OS |
|||
| GROUND STUD M83454 BACS53B1EA1/2 |
8/32 10/32 |
GS8-704-16 GS10-704A-19 |
GS8-704A-54RA GS10-704-54RA |
GS8-704-40OS GS10-704A-40OS |
|||
READ BEFORE USE!
| GAGE BILT CERTIFIES THE GB107A-704 WILL INSTALL THE FASTENERS LISTED ABOVE WITH NOSE ASSEMBLIES SHOWN ABOVE. BEFORE USING COMPETITOR OFFSET OR RIGHT ANGLE NOSE ASSEMBLIES CONTACT GAGE BILT FOR APPROVAL. FAILURE TO GET APPROVAL WILL VOID TOOL WARRANTY. |
FOOTNOTES
| 1) 10770454RA STROKE LIMITER REQUIRED (SOLD SEPARATE) AND MUST BE USED FOR ALL RIGHT ANGLE "RA" NOSES. FAILURE TO USE STROKE LIMITER WILL RESULT IN TOOL FAILURE AND WILL VOID WARANTY. RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN ONE PULL | |
| 2) FRONT EJECTING NOSE ASSEMBLY. | |
| NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE APPROXIMATE LENGTH THE NOSEEXTENDS FROM THE TOOL I.E. -16 = 1.6 INCHES |
CREDITS
| CHERRYMAX® and MBC® are registered trademarks of Cherry Aerospace Fasteners. UNIMATIC® is a registered trademark of Howmet Aerospace. |